On 8/28/06, Karsten Ohme <[EMAIL PROTECTED]> wrote:
John DeCarlo wrote:
> Hello,
>
> I have read just about everything I could find on the MUSCLE site.
>
> I have installed pcsc-lite 1.3.2
>
> I believe that my Dell Latitude D800 has an O2Micro SmartCard reader,
> built into the side just below the PCMCIA reader.
>
> I have installed the O2Micro device module (ozscrlx) and there are no
> complaints when I do "modprobe ozscrlx".
Of course, this is not enough. This would be too easy. This is not the
way an operating system is meant to be.
You have inserted a kernel module. Now you need another driver for PC/SC
(Lite) usually installed in /usr/(local/)lib/pcsc/drivers (If I remeber
correctly.) Look at this site:
http://www.musclecard.com/sourcedrivers.html
And maybe you will find a driver.
That is exactly what I have done. I downloaded the driver as
mentioned above from that site. I then configured, make, and make
install.
The result, as far as I can tell, is a kernel module and a library in
/usr/local/o2micro
And I copied that folder into /usr/local/pcsc/drivers, as mentioned
somewhere. Oh, it also updated /etc/reader.conf with information.
What next?
--
John DeCarlo, My Views Are My Own
_______________________________________________
Muscle mailing list
[email protected]
http://lists.drizzle.com/mailman/listinfo/muscle
