Hello, I try to use this cardreader on fedora core 5 but it fails. currently I am using the following software:
libusb => 0.1.12 pcsc-lite => 1.3.3 ccid => 1.2.1 kernel => 2.6.18-1.2257.fc5 ACR38 card => ACR38_LINUX_100709_P ACR38 driver,pcsc-lite was installed by compiling the latest sources ccid also lsusb gives: Bus 005 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 002 Device 005: ID 072f:9000 Advanced Card Systems, Ltd ACR38 AC1038-based Smart Card Reader Bus 002 Device 001: ID 0000:0000 problems start when pcsc-lite deamon starts: Jan 30 19:28:43 microserv kernel: usb 2-1: usbfs: process 32231 (pcscd) did not claim interface 0 before use the [/proc/bus/usb/] entries exist: drwxr-xr-x 7 root root 0 Jan 28 13:35 . dr-xr-xr-x 6 root root 0 Jan 28 13:35 .. dr-xr-xr-x 2 root root 0 Jan 28 13:35 001 dr-xr-xr-x 2 root root 0 Jan 28 13:35 002 dr-xr-xr-x 2 root root 0 Jan 28 13:35 003 dr-xr-xr-x 2 root root 0 Jan 28 13:35 004 dr-xr-xr-x 2 root root 0 Jan 28 13:35 005 -r--r--r-- 1 root root 0 Jan 30 19:23 devices en devices contains: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=072f ProdID=9000 Rev= 1.00 S: Manufacturer=ACS S: Product=ACR38 USB Reader C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=2ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms when I set pcsc to debug : /usr/local/sbin/pcscd --debug -a -f pcscdaemon.c:319:main() pcscd set to foreground with debug send to stderr pcscdaemon.c:533:main() pcsc-lite 1.3.3 daemon ready. hotplug_libusb.c:446:HPAddHotPluggable() Adding USB device: 002:005 readerfactory.c:1108:RFInitializeReader() Attempting startup of ACS ACR38U 00 00 using /usr/local/pcsc/drivers/ACR38UDriver.bundle/Contents/Linux/ACR38UDriver readerfactory.c:943:RFBindFunctions() Loading IFD Handler 2.0 ifdwrapper.c:493:IFDStatusICC() Card not transacted: 612 eventhandler.c:166:EHSpawnEventHandler() Initial Check Failed on ACS ACR38U 00 00 hotplug_libusb.c:394:HPEstablishUSBNotifications() Driver ifd-ccid.bundle does not support IFD_GENERATE_HOTPLUG pcscdaemon.c:614:signal_trap() Preparing for suicide hotplug_libusb.c:368:HPRescanUsbBus() Hotplug stopped readerfactory.c:1363:RFCleanupReaders() entering cleaning function readerfactory.c:1372:RFCleanupReaders() Stopping reader: ACS ACR38U 00 00 eventhandler.c:106:EHDestroyEventHandler() Thread never started (reader init failed?) readerfactory.c:1155:RFUnInitializeReader() Attempting shutdown of ACS ACR38U 00 00. readerfactory.c:1022:RFUnloadReader() Unloading reader driver. pcscdaemon.c:558:at_exit() cleaning /var/run If anyone could help me, thanks in advance Alain -- View this message in context: http://www.nabble.com/another-ARC38-cardreader-problem-tf3144614.html#a8717010 Sent from the MuscleCard mailing list archive at Nabble.com. _______________________________________________ Muscle mailing list [email protected] http://lists.drizzle.com/mailman/listinfo/muscle
