Hi all

So I recently recived a smartcard reader which I would like to get to work
under linux.
All my searches online so far turned up a TON of information but none
relevant to configuring the base software to work.

So the info for my card reader:

Product name XX-Identifier by RBT Technology
Product page: http://www.rbetech.com/en/products/kr-f4.htm

>From the visual inspection of the PCB it's running on a:
imt5123-a2 chip

I received no windows drivers and the website's download page seems to lack
any downloads as well...

If anyone can help me with this it would be much appreciated.

lsusb -v output:
Bus 003 Device 002: ID 11c5:5123  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        32
  idVendor           0x11c5 
  idProduct          0x5123 
  bcdDevice            1.10
  iManufacturer           1 Inmax Technology Corp.
  iProduct                2 USB PC/SC SmartCard Reader
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval             255
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x86  EP 6 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
Device Status:     0x0000
  (Bus Powered)

--
Andraž "ruskie" Levstik
Source Mage GNU/Linux Games grimoire guru
Geek/Hacker/Tinker

Be sure brain is in gear before engaging mouth.

Key id = F4C1F89C
Key fingerprint = 6FF2 8F20 4C9D DB36 B5B6  F134 884D 72CC F4C1 F89C

_______________________________________________
Muscle mailing list
[email protected]
http://lists.drizzle.com/mailman/listinfo/muscle

Reply via email to