2010/1/17 Gregor Dschung <[email protected]>: >> 2010/1/17 Gregor Dschung <[email protected]>: >>> I've tried a few times to mail the log-files, but it seems the >>> mailing-list server won't accept those mails. Thus pastebin.com: >>> O2micro: http://pastebin.com/m6d900754 >>> GemPC Twin: http://pastebin.com/m454cda1e >>> >>> I hope this helps. >> >> No. >> Change the debug level to 7 as explained in [1]. > > Sorry, my fault. You find the log for the O2micro Reader in > http://pastebin.com/m25e61f7d
winscard.c:296:SCardConnect() Attempting Connect to O2 Micro Oz776 00 00 using protocol: 3 prothandler.c:128:PHSetProtocol() Attempting PTS to T=1 ifdhandler.c:488:IFDHSetProtocolParameters() lun: 0, protocol T=1 ifdhandler.c:1466:find_baud_rate() Card baud rate: 129032 ifdhandler.c:1475:find_baud_rate() Reader can do: 9600 ifdhandler.c:616:IFDHSetProtocolParameters() Reader does not support 129032 bauds towitoko/atr.c:339:ATR_GetDefaultProtocol() default protocol: T=0 ifdhandler.c:706:IFDHSetProtocolParameters() PPS not supported on O2Micro readers. Using T=0 ifdhandler.c:833:IFDHSetProtocolParameters() Communication timeout: 372 seconds commands.c:1947:SetParameters() length: 5 bytes -> 000000 61 05 00 00 00 00 1B 00 00 00 11 00 00 10 00 <- 000000 82 05 00 00 00 00 1B 00 00 00 11 00 00 10 00 winscard.c:428:SCardConnect() Active Protocol: T=1 winscard.c:438:SCardConnect() hCard Identity: 1079f winscard_msg_srv.c:287:SHMProcessEventsContext() correctly processed client: 10 winscard.c:1022:SCardBeginTransaction() Status: 0x00000000 winscard_msg_srv.c:287:SHMProcessEventsContext() correctly processed client: 10 winscard.c:1603:SCardTransmit() Send Protocol: T=1 APDU: 00 CA DF 20 00 ifdhandler.c:1035:IFDHTransmitToICC() lun: 0 commands.c:1922:CmdXfrBlockTPDU_T1() T=1: 5 and 1024 bytes openct/proto-t1.c:581:t1_build() more bit: 0 sending: 00 00 05 00 CA DF 20 00 30 -> 000000 6F 09 00 00 00 00 1C 00 03 00 00 00 05 00 CA DF 20 00 30 <- 000000 80 02 00 00 00 00 1C 40 FE 00 6D 00 commands.c:1236:CCID_Receive Card absent or mute openct/proto-t1.c:221:t1_transceive() fatal: transmit/receive failed SW: The reader is bogus and does not support PPS. So my CCID driver has a workaround but the workaround is not complete. The driver should report to pcsc-lite that T=1 is not possible. It may be possible to write more code in the CCID driver to workaround bugs in the O2Micro readers. But I really have more important things to do. I suggest you continue using your GemPC Twin reader and throw away the O2Micro one (even it is already included in your laptop). I move the two O2Mirco readers in the "unsupported" list. Bye -- Dr. Ludovic Rousseau
_______________________________________________ Muscle mailing list [email protected] http://lists.drizzle.com/mailman/listinfo/muscle
