HI,
I'm new to the list. and wanted to get some input of how to go about solving
this error i see
when i connect my ACR122U102 (tikitag) reader
i looked around the list to try out any suggestions from folks who ran into a
similar problem but couldn't dig much.
so i tried changing the
/usr/lib/pcsc/drivers/ifd-ccid.bundle/Contents/Info.plist and changed the
ifdLogLevel to 0x0004
I'm running ubuntu on alwaysinnovating touchbook
here are the versions of diff components
pcscd 1.5.3-1ubuntu1
libccid 1.3.10-1
libhal1 0.5.13-1ubuntu8
r...@touchbook:/etc/init.d# pcscd --debug -a -f
00000000 pcscdaemon.c:267:main() pcscd set to foreground with debug send to
stderr
00002564 pcscdaemon.c:505:main() pcsc-lite 1.5.3 daemon ready.
01327240 hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x148F,
PID: 0x3070
00051239 hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x072F,
PID: 0x90CC
00000671 hotplug_libhal.c:342:HPAddDevice() Adding USB device:
usb_device_72f_90cc_noserial_if0
01004303 readerfactory.c:1024:RFInitializeReader() Attempting startup of ACS
ACR 38U-CCID 00 00 using
/usr/lib/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/libccid.so
00002716 readerfactory.c:877:RFBindFunctions() Loading IFD Handler 3.0
00000916 ifdhandler.c:1417:init_driver() Driver version: 1.3.10
00004577 ccid_usb.c:160:OpenUSBByName() Reader index: 0, Device:
usb:072f/90cc:libhal:/org/freedesktop/Hal/devices/usb_device_72f_90cc_noserial_if0
00001435 readerfactory.c:1050:RFInitializeReader() Open Port 200000 Failed
(usb:072f/90cc:libhal:/org/freedesktop/Hal/devices/usb_device_72f_90cc_noserial_if0)
00011566 readerfactory.c:914:RFUnloadReader() Unloading reader driver.
00000763 readerfactory.c:233:RFAddReader() ACS ACR 38U-CCID init failed.
00000519 hotplug_libhal.c:397:HPAddDevice() Failed adding USB device:
usb_device_72f_90cc_noserial_if0
00201812 hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x04CC,
PID: 0x1521
00007721 hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0xA110,
PID: 0x0002
00008545 hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0xA110,
PID: 0x0002
00015107 hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x1D6B,
PID: 0x0002
any insights would be appreciated.
thanks !
_______________________________________________
Muscle mailing list
[email protected]
http://lists.drizzle.com/mailman/listinfo/muscle
