2010/8/30 Marcel Mancini <[email protected]>: > you were right! i was giving one less byte that i should! however that > doesnt change the result. Here is the output: > > 00000007 ifdhandler.c:1065:IFDHSetProtocolParameters() Communication > timeout: 250949 ms > 00000011 commands.c:2046:SetParameters() length: 5 bytes > 00000017 -> 000000 61 05 00 00 00 00 0E 00 00 00 18 00 00 0A 00 > 00003923 <- 000000 82 05 00 00 00 00 0E 00 00 00 18 00 00 0A 00 > 00000012 winscard.c:424:SCardConnect() Active Protocol: T=0 > 00000008 winscard.c:444:SCardConnect() hCard Identity: 15add > 00000008 winscard_svc.c:447:ContextThread() CONNECT rv=0x0 for client 10 > 00000113 winscard_svc.c:309:ContextThread() Received command: TRANSMIT from > client 10 > 00000018 winscard.c:1648:SCardTransmit() Send Protocol: T=0 > 00000012 APDU: 00 E0 00 00 0A 62 08 82 02 3F FF 83 02 3F 00 > 00000006 ifdhandler.c:1288:IFDHTransmitToICC() > usb:058f/9520:libhal:/org/freedesktop/Hal/devices/usb_device_58f_9520_noserial_if0 > (lun: 0) > 00000012 commands.c:1543:CmdXfrBlockTPDU_T0() T=0: 15 bytes > 00000010 -> 000000 6F 0F 00 00 00 00 0F 00 00 00 00 E0 00 00 0A 62 08 82 02 > 3F FF 83 02 3F 00 > 01009628 <- 000000 80 00 00 00 00 00 0F 41 FE 00 > 00000040 commands.c:1317:CCID_Receive Card absent or mute
The card does not answer. > 00000017 SW: > 00000016 ifdwrapper.c:746:IFDTransmit() Card not transacted: 612 > 00000016 winscard.c:1673:SCardTransmit() Card not transacted: 0x80100016 > 00000017 winscard_svc.c:640:ContextThread() TRANSMIT rv=0x80100016 for > client 10 > 00000162 winscard_svc.c:309:ContextThread() Received command: TRANSMIT from > client 10 > 00000052 winscard.c:1648:SCardTransmit() Send Protocol: T=0 > 00000021 APDU: 00 A4 00 00 02 41 05 > 00000017 ifdhandler.c:1288:IFDHTransmitToICC() > usb:058f/9520:libhal:/org/freedesktop/Hal/devices/usb_device_58f_9520_noserial_if0 > (lun: 0) > 00000017 commands.c:1543:CmdXfrBlockTPDU_T0() T=0: 7 bytes > 00000027 -> 000000 6F 07 00 00 00 00 10 00 00 00 00 A4 00 00 02 41 05 > 00005085 ccid_usb.c:652:ReadUSB() read failed (6/7): -99 Invalid argument The reader now does not answer. And we have the same error until the end of the log. Can you try with another smart card reader? Bye -- Dr. Ludovic Rousseau _______________________________________________ Muscle mailing list [email protected] http://lists.drizzle.com/mailman/listinfo/muscle
