2010/12/9 Alessandro Vincelli <alessandro.vince...@wedjaa.net>: > Hello,
Hello, > I'm using two readers Gemplus GemPC Twin USB on a debian 4.0etch (but I > reproduced the problem below also on Debian lenny). > One reader is used from the system (smart card always inserted), the other > reader is used from a client (card colud be removed). > The readers are used by a java application on JDK 1.6.21. > The Java application runs Ok, using and accessing corrrectly the readers. > The system stop to work when a Usb Flash Drive is inserted. > The access to the smart card readers become very slow, and after few minutes > the SmartCard used by the system become unusable. The Smartcard become > unusable also on Windows usign the Gamalto Classic Client Tool box that > marks the card with an ! exclamation point. If the problem also occurs on Windows I would suspect a hardware problem. > Below some logs that describes when the Readers stops to work, from the > /var/log/messages I do not see anything interesting in the log. The card becomes mute at some time. If you use a USB hub then try without the hub. Also try to connect the flash driver on a different USB controller. Any kernel messages? See the output of the dmesg command. Bye -- Dr. Ludovic Rousseau _______________________________________________ Muscle mailing list Muscle@lists.musclecard.com http://lists.drizzle.com/mailman/listinfo/muscle
