On 06/23/2011 04:29 PM, Ludovic Rousseau wrote:
2011/6/23 Mariano Benedettini<[email protected]>:
On 06/23/2011 03:34 PM, Ludovic Rousseau wrote:
2011/6/23 Mariano Benedettini<[email protected]>:
Hello:
I'm trying to make an Omnikey 5321 usb work, and I'm getting these
errors:
00001185 ifdhandler.c:1151:IFDHPowerICC() action: PowerUp,
usb:076b/5321:libudev:0:/dev/bus/usb/004/003 (lun: 0)
00008931 readerfactory.c:1301:RFWaitForReaderInit() Waiting init for
reader:
OmniKey CardMan 5321 (USB iClass Reader) 00 00
00010178 readerfactory.c:1301:RFWaitForReaderInit() Waiting init for
reader:
OmniKey CardMan 5321 (USB iClass Reader) 00 00
00010095 readerfactory.c:1301:RFWaitForReaderInit() Waiting init for
reader:
OmniKey CardMan 5321 (USB iClass Reader) 00 00
00000806 commands.c:233:CmdPowerOn Card absent or mute
00000027 ifdhandler.c:1204:IFDHPowerICC() PowerUp failed
00000017 eventhandler.c:271:EHStatusHandlerThread() powerState:
POWER_STATE_UNPOWERED
00000017 eventhandler.c:272:EHStatusHandlerThread() Error powering up
card:
-2146435050 0x80100016
I'm running following software versions on a Ubuntu 11.04:
libpcsclite1 1.7.0
pcscd 1.7.0
libccid 1.4.2
Any ideas?
The log says: "Card absent or mute"
Check your card.
Is it inserted in the correct way?
Bye
Yes, actually the reader works fine in Windows with its proprietary driver.
The cards are Mifare Classic 1K and you can find attached the output of
pcscd --foreground --debug --apdu.
Does the card have electrical contacts?
Your Mifare Classic 1K card may be contactless only.
There is also a strange behaviour: the reader accepts cards in two ways:
approaching them to the top of it and inserting them into the slot. Both
ways work fine in Windows, but with pcscd the reader only tries to read the
card if I insert it into the slot. (Is that the result of "The RFID
interface is not supported."?).
Yes.
You need to use a contactless reader within the supported list [1].
Look for "contactless".
Bye
[1] http://pcsclite.alioth.debian.org/ccid/supported.html
Yes, that was the whole problem. I'm using the proprietary driver then.
Sorry for bothering you.
--
Mariano Benedettini
Qmas It - Bet3000 Development Team
_______________________________________________
Muscle mailing list
[email protected]
http://lists.drizzle.com/mailman/listinfo/muscle
