Hi I would like to ask if it is possible to use my smart card under linux, I've attached some usefull logs.
Regards CCID driver version - ccid-1.3.9-3.el6.x86_64 pcsc-lite version - pcsc-lite-1.5.2-7.el6.x86_64 - pcsc-lite-libs-1.5.2-7.el6.x86_64 - pcsc-lite-openct-0.6.19-4.el6.x86_64 smart card reader name (from Windows ActiveClient) - Found '3' reader(s) - Reader #1: - Reader Name = ActivCard ActivKey 0 - Channel Type = 0x20 - Channel ID = 0x00 - Characteristics = 0 - Default Clock Rate = '3570' kHz - Default Data Rate = '9600' bps - Friendly Name = 'ActivCard ActivKey 0' - System Name = 'ActivCard ActivKey 0' - Device Unit = '0' - ICCInterfaceStatus = 'FF' - ICCPresence = '02' - Max Clock Rate = '3570' - Max Data Rate = '9600' - Max IFSD = '254' - Power Mgmt Support = '0' - Protocol Types = '3' - Vendor IFD Type = 'ActivKey' - Vendor IFD Version = '1.2.3' - Vendor Name = 'ActivCard S.A.' - Reader #2: - Reader Name = ActivIdentity ActivKey Sim 0 - Channel Type = 0x00 - Channel ID = 0x00 - Characteristics = 0 - Default Clock Rate = '0' kHz - Default Data Rate = '0' bps - Friendly Name = '' - System Name = '' - Device Unit = '0' - ICCInterfaceStatus = '00' - ICCPresence = '00' - Max Clock Rate = '0' - Max Data Rate = '0' - Max IFSD = '0' - Power Mgmt Support = '0' - Protocol Types = '0' - Vendor IFD Type = '' - Vendor IFD Version = '' - Vendor Name = '' - - Reader #3: - Reader Name = Mobile Broadband SIM Card Reader 0 - Channel Type = 0x20 - Channel ID = 0x00 - Characteristics = 0 - Default Clock Rate = '4000' kHz - Default Data Rate = '9600' bps - Friendly Name = 'Mobile Broadband SIM Card Reader 0' - System Name = 'Mobile Broadband SIM Card Reader 0' - Device Unit = '0' - ICCInterfaceStatus = 'FF' - ICCPresence = '02' - Max Clock Rate = '4000' - Max Data Rate = '9600' - Max IFSD = '0' - Power Mgmt Support = '0' - Protocol Types = '1' - Vendor IFD Type = 'SIM Card Reader' - Vendor IFD Version = '6.5.1' - Vendor Name = 'Mobile Broadband' the output of the command "/usr/sbin/pcscd --version" - pcsc-lite version 1.5.2. - Copyright (C) 1999-2002 by David Corcoran <[email protected]>. - Copyright (C) 2001-2008 by Ludovic Rousseau <[email protected]>. - Copyright (C) 2003-2004 by Damien Sauveron <[email protected]>. - Report bugs to <[email protected]>. - Enabled features: Linux libhal usbdropdir=/usr/lib64/pcsc/drivers confdir=/etc ipcdir=/var/run Operating system name and version - Red Hat Enterprise Linux Server release 6.3 (Santiago) Smart card middleware name and version Reader manufacturer name and reader model name Smart card name Then you shall generate a complete log. Kill any running pcscd process (re)start pcscd exactly as described bellow: sudo LIBCCID_ifdLogLevel=0x000F pcscd --foreground --debug --apdu | tee log.txt Stop pcscd (using Control-C) after the problem occured and send me the generated log.txt file - pcscdaemon.c:267:main() pcscd set to foreground with debug send to stderr - debuglog.c:239:DebugLogSetLevel() debug level=debug - debuglog.c:268:DebugLogSetCategory() Debug options: APDU - pcscdaemon.c:506:main() pcsc-lite 1.5.2 daemon ready. - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x09C3, PID: 0x0003 - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x8087, PID: 0x0024 - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x0BDB, PID: 0x1911 - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x0BDB, PID: 0x1911 - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x0BDB, PID: 0x1911 - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x0BDB, PID: 0x1911 - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x0BDB, PID: 0x1911 - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x0BDB, PID: 0x1911 - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x0BDB, PID: 0x1911 - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x0BDB, PID: 0x1911 - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x0BDB, PID: 0x1911 - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x0BDB, PID: 0x1911 - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x0BDB, PID: 0x1911 - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0002 - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x8087, PID: 0x0024 - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x04F2, PID: 0xB217 - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x04F2, PID: 0xB217 - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x0A5C, PID: 0x217F - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x0A5C, PID: 0x217F - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x0A5C, PID: 0x217F - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x0A5C, PID: 0x217F - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x147E, PID: 0x2016 - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x09DA, PID: 0x054F - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x09DA, PID: 0x054F - hotplug_libhal.c:307:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0002 - pcscdaemon.c:581:signal_trap() Preparing for suicide - readerfactory.c:1267:RFCleanupReaders() entering cleaning function - pcscdaemon.c:531:at_exit() cleaning /var/run dmesg - usb 1-1.1: new low speed USB device number 7 using ehci_hcd - usb 1-1.1: New USB device found, idVendor=09c3, idProduct=0003 - usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 - usb 1-1.1: Product: Token-USB - usb 1-1.1: Manufacturer: ActivCard S.A. - usb 1-1.1: configuration #1 chosen from 1 choice Reader #1: Reader Name = ActivCard ActivKey 0 Channel Type = 0x20 Channel ID = 0x00 Characteristics = 0 Default Clock Rate = '3570' kHz Default Data Rate = '9600' bps Friendly Name = 'ActivCard ActivKey 0' System Name = 'ActivCard ActivKey 0' Device Unit = '0' ICCInterfaceStatus = 'FF' ICCPresence = '02' Max Clock Rate = '3570' Max Data Rate = '9600' Max IFSD = '254' Power Mgmt Support = '0' Protocol Types = '3' Vendor IFD Type = 'ActivKey' Vendor IFD Version = '1.2.3' Vendor Name = 'ActivCard S.A.' Reader #2: Reader Name = ActivIdentity ActivKey Sim 0 Channel Type = 0x00 Channel ID = 0x00 Characteristics = 0 Default Clock Rate = '0' kHz Default Data Rate = '0' bps Friendly Name = '' System Name = '' Device Unit = '0' ICCInterfaceStatus = '00' ICCPresence = '00' Max Clock Rate = '0' Max Data Rate = '0' Max IFSD = '0' Power Mgmt Support = '0' Protocol Types = '0' Vendor IFD Type = '' Vendor IFD Version = '' Vendor Name = '' Reader #3: Reader Name = Mobile Broadband SIM Card Reader 0 Channel Type = 0x20 Channel ID = 0x00 Characteristics = 0 Default Clock Rate = '4000' kHz Default Data Rate = '9600' bps Friendly Name = 'Mobile Broadband SIM Card Reader 0' System Name = 'Mobile Broadband SIM Card Reader 0' Device Unit = '0' ICCInterfaceStatus = 'FF' ICCPresence = '02' Max Clock Rate = '4000' Max Data Rate = '9600' Max IFSD = '0' Power Mgmt Support = '0' Protocol Types = '1' Vendor IFD Type = 'SIM Card Reader' Vendor IFD Version = '6.5.1' Vendor Name = 'Mobile Broadband'
_______________________________________________ Muscle mailing list [email protected] http://lists.drizzle.com/mailman/listinfo/muscle
