Diode drops are not acceptable and a reversed diode needs to be rated to several amps at least.
For probably less than a couple of cents extra use BOXED HEADERS!!!!!!

Best Regards

Laurie Biddulph
Mobile.......: +61 0400 257 645
Phone.......: +61 02 4340 0938
Skype.......: widgetoz

<http://www.elby-designs.com><https://www.facebook.com/euro.serge.modular/>

ELBY Designs
9 Follan Close
Kariong
NSW 2250
Australia

ABN: 70 022 727 605

<http://www.elby-designs.com/webtek/euro-serge/euro-serge.thm> 2017 - Year of the EuroSerge Rooster



-------- Forwarded Message --------
Subject: Re: [music-dsp] [dumb question] do Eurorack audio and CV signals use the same connectors?
Date:   Tue, 14 Nov 2017 17:10:46 +0100
From:   STEFFAN DIEDRICHSEN <sdiedrich...@me.com>
Reply-To:       music-dsp@music.columbia.edu
To:     music-dsp@music.columbia.edu



Be aware of the power supply stuff. The connector can be reversed, which may lead to unwanted escape of holy smoke or similar uncontained engine failures. Protection diodes to avoid wrong polarisation make sense, if the voltage drop across them is acceptable.


Steffan


On 14.11.2017|KW46, at 16:37, Vladimir Pantelic <vlado...@gmail.com <mailto:vlado...@gmail.com>> wrote:

for completeness' sake this applies to power connections too ;)


_______________________________________________
dupswapdrop: music-dsp mailing list
music-dsp@music.columbia.edu
https://lists.columbia.edu/mailman/listinfo/music-dsp
_______________________________________________
dupswapdrop: music-dsp mailing list
music-dsp@music.columbia.edu
https://lists.columbia.edu/mailman/listinfo/music-dsp

Reply via email to