* David Woodfall <[email protected]> [09-28-18 17:37]: > Hi > > In the (framebuffer) console I've used the standard escape codes to > set a small 1/3 block cursor to make it more visible, and softened > the colours to not be so stark. They were a bit of a headache > before, and the normal cursor is very hard to see. > > Unfortunately, when I start mutt everything resets back to the > defaults. I only see a couple of settings regarding the cursor, but > they don't seem to help. I've tried running with a -F /dev/null so > it doesn't seem to be something in my config. Is there any way of > avoiding this? > > In screen it's not so bad, but the cursor resets even just switching > to the window where mutt is running. The colours remain as they were > though. > > The cursor code I use is: > > printf '\e[?3c' > > Any ideas?
your chosen terminal is undoubted the cause. I run a tmux session on my server and attach to it remotely usually via yakuake(konsole) but have not made any effort to change the cursor. you have pretty well removed mutt from the equasion using "-F /dev/null". -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Registered Linux User #207535 @ http://linuxcounter.net Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode
