Barak Ori wrote: > Again, I would like to mention the wMVP worked fine with GB-PVR, > including loading mvpmc...
Any reason why you can't continue using the same mechanism for loading mvpmc? You'll need to change the IP address for the MythTV server, but you can do that via the setup menu in mvpmc. > - Wireless MVP Model 86017 Rev H3 Lot 3406 > > I tried the TFTP method and the python script. What Python script? You might want to try: http://mvpmc.wikispaces.com/perlboot You can watch /var/log/daemon.log for messages from both the boot server and the TFTP server to monitor the boot process. > I'd rather have the router handle DHCP... Until you need to load a custom config file, that's possible. > ...I get a "checking network status..." message, and after a while, I > get the following message: > > No streaming server found! Please check your network settings and make > sure server is running. I believe that is indicative of a boot failure, and instead the Hauppauge firmware completed its startup and attempted to contact a streaming server. My understanding is that wireless MVP's require that you get the wireless settings working first with the stock firmware, but it sounds like you've done that already. -Tom ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Mvpmc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mvpmc-users mvpmc wiki: http://mvpmc.wikispaces.com/
