Hello, I am using Lucid Beta with a Hauppauge HVR-2200 dual DVB-T tuner. It takes a second or two to upload the firmware to the card in the initialisation process and it seems that it is causing this issue. If I type "sudo restart mythtv-backend" then all works correctly. Sometimes it works fine without this. From reading the logs (let me know if you would like me to upload them), it seems that this is simply because sometimes the firmware has loaded and the /dev/ nodes are set up before the backend is loaded and sometimes it is not (causing errors about the devices not existing).
Would it be possible for the mythtv-backend upstart job to wait until the DVB device nodes were properly set up? -- Always have to manually restart mythtv-backend after reboot https://bugs.launchpad.net/bugs/182746 You received this bug notification because you are a member of Mythbuntu Bug Team, which is subscribed to Mythbuntu. Status in Mythbuntu, Ubuntu derivative focused upon MythTV: Confirmed Bug description: I am on my second install of mythbuntu and I find after every reboot, that I have to restart mythtv-backend in order to watch tv. sudo /etc/init.d/mythtv-backend restart The error I get is the "all inputs are being used...". Am I the only one this is happening to? Just in case, here are some specs.. shuttle sn21g5 case, opteron 165, 1gig mem, nvidia 6600, turtle beach sound, 500GB seagate drive. Thanks!! _______________________________________________ Mailing list: https://launchpad.net/~mythbuntu-bugs Post to : [email protected] Unsubscribe : https://launchpad.net/~mythbuntu-bugs More help : https://help.launchpad.net/ListHelp
