1. Get source code like described here:
http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-
DVB_Device_Drivers#Using_Mercurial

2. Edit the file v4l-dvb/linux/drivers/media/video/cx88/cx88-dvb.c
- search for CX88_BOARD_HAUPPAUGE_HVR1300 (somewhere around line 1470 )
- change the lines that they look like:

        switch (core->boardnr) {
        case CX88_BOARD_HAUPPAUGE_HVR1300:
                /* We arrive here with either the cx23416 or the cx22702
                 * on the bus. Take the bus from the cx23416 and enable the
                 * cx22702 demod
                 */
                /* Toggle reset on cx22702 leaving i2c active */
                cx_set(MO_GP0_IO, 0x00000080);
                //udelay(1000);
                //cx_clear(MO_GP0_IO, 0x00000080);
                //udelay(50);
                //cx_set(MO_GP0_IO, 0x00000080);
                //udelay(1000);
                /* enable the cx22702 pins */
                cx_clear(MO_GP0_IO, 0x00000004);
                udelay(1000);
                break;


3. then go on like described in the wikipage how to build and install. Maybe 
you have to disable firedtv card in the config by first doing a "make 
menuconfig" and disable it there.

-- 
HVR-1300 HVR-3000 HVR-4000 broken in kernel
https://bugs.launchpad.net/bugs/439163
You received this bug notification because you are a member of Mythbuntu
Bug Team, which is subscribed to MythTV.

Status in Mythbuntu, Ubuntu derivative focused upon MythTV: Triaged
Status in MythTV: Invalid
Status in “linux” package in Ubuntu: Triaged

Bug description:
This is a continuation of bug #436564. Please refer to that for relevant dmesg'.
The capture card I have is the Hauppauge HVR-1300.
The card is now correctly recognized as DVB-T but channel scan fails with 
message "Timed out, no signal" at each channel is scanned.
The command scan <location> > channels.conf ends correcly and file 
channels.conf is feeded with all tunable channels.
I tried to import such channels.conf with the same result.
Increasing the signal and channel timeout in the DVB settings (now up to 1000 
but I planned to increase to ignore) doesnt solve the problem.
Tonight I will try what Marc suggested - mythtv-setup --verbose 
channelscan,siparser,channel,record - then I will report the log.





_______________________________________________
Mailing list: https://launchpad.net/~mythbuntu-bugs
Post to     : [email protected]
Unsubscribe : https://launchpad.net/~mythbuntu-bugs
More help   : https://help.launchpad.net/ListHelp

Reply via email to