Marking invalid as this release isn't supported anymore. Can anyone
confirm that this issue is still present on a supported Mythbuntu/MythTV
release? If so, feel free to reopen.
** Changed in: mythbuntu
Status: Triaged => Invalid
--
You received this bug notification because you are a member of Mythbuntu
Bug Team, which is subscribed to Mythbuntu.
https://bugs.launchpad.net/bugs/281572
Title:
ATI/Nvidia X10 RF Userspace remote gets disabled when serial blaster
is enabled with MCC
Status in Mythbuntu, Ubuntu derivative focused upon MythTV:
Invalid
Bug description:
If MMC is used to configure ATI Wonder remote (5000015900A) with
ATI/Nvidia X10 RF Userspace. The remote appears to work fine.
Tested within MythTV Frontend and irw.
The following is created
/dev/lircd
# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="ATI/NVidia X10 RF (userspace)"
REMOTE_MODULES=""
REMOTE_DRIVER="atilibusb"
REMOTE_DEVICE=""
REMOTE_LIRCD_CONF="atiusb/lircd.conf.atilibusb"
REMOTE_LIRCD_ARGS=""
Once I enable serial blaster within MCC, the ATI remote stops working
and the serial blaster does not work either. Selected "Serial Port
(UART) : Dish Receiver. Rebooted as test.
The following is created
/dev/lirc0
/dev/lircd
lsmod | grep lirc shows
llsmod | grep lirc
lirc_serial 21140 0
lirc_dev 20020 1 lirc_serial
dmesg
[ 865.995998] lirc_dev: IR Remote Control driver registered, major 61
[ 866.516070] lirc_serial: auto-detected active high receiver
[ 866.516092] lirc_dev: lirc_register_plugin: sample_rate: 0
Reference files.
cat /etc/serial.conf
/dev/ttyS0 uart none
cat /etc/modprobe.d/lirc-blacklist
blacklist lirc_atiusb
blacklist ati_remote
cat /etc/modprobe.d/lirc-serial
#COM1 equivalent, /dev/ttyS0
options lirc_serial irq=4 io=0x3f8
/etc/lirc/hardware.conf
#Chosen IR Transmitter
TRANSMITTER="Serial Port (UART) : Dish Receiver"
TRANSMITTER_MODULES="lirc_dev lirc_serial"
TRANSMITTER_DRIVER=""
TRANSMITTER_DEVICE=""
TRANSMITTER_LIRCD_CONF="dish/general.conf"
TRANSMITTER_LIRCD_ARGS=""
If I specify TRANSMITTER_DEVICE="/dev/lirc1" and restart lirc
(/etc/init.d/lirc restart). I noticed the following :
/dev/lirc0
/dev/lircd
/dev/lircd1
Not sure what this proves serial blaster tested with :
irsend -d /dev/lircd1 send_once dish 1
irsend: could not connect to socket
irsend: No such file or directory
I know the blaster does work since I did make it work in previous
Mythbuntu 8.10 install test....Just don't know the setup combination I
used to make it work.
_______________________________________________
Mailing list: https://launchpad.net/~mythbuntu-bugs
Post to : [email protected]
Unsubscribe : https://launchpad.net/~mythbuntu-bugs
More help : https://help.launchpad.net/ListHelp
