Adding a linux task. Most of the firmware links are now completely missing.
Particularly for this report, these messages come from the smsusb module, but this does not have any firmware links: $ modinfo -F firmware smsusb $ It should link to sms1xxx-hcw-55xxx-dvbt-02.fw, as it's trying to load that. Firmware like "dvb-usb-dtt200u-01.fw" certainly belongs to dvb-usb- dtt200u.ko, but again there is no link at all. The only two DVB modules which still have fw links are dvb-usb-dib0700.ko and dvb-usb-dw2102.ko, all others are missing. Also, we seem to have some obsolete firmware files: e. g. "dvb-usb- dib0700-1.10.fw" certainly belongs to dvb-usb-dib0700.ko, but that links to dvb-usb-dib0700-1.20.fw now. Also there are quite a lot of firmware files which don't seem to belong to any module any more. -- You received this bug notification because you are a member of Mythbuntu Bug Team, which is subscribed to linux-firmware-nonfree in Ubuntu. https://bugs.launchpad.net/bugs/1068356 Title: lots of missing firmware links Status in “linux” package in Ubuntu: Incomplete Status in “linux-firmware-nonfree” package in Ubuntu: Triaged Bug description: Today I tried my Hauppauge Ministick DVB-T tuner (2040:c000) with Kaffeine, but it didn't recognized it. Lookig at /var/log/dmesg I saw these lines: [ 13.538438] smscore_set_device_mode: error -2 loading firmware: sms1xxx-hcw-55xxx-dvbt-02.fw, trying again with default firmware [ 13.540204] smscore_set_device_mode: error -2 loading firmware: dvb_nova_12mhz_b0.inp [ 13.540209] smsusb_init_device: line: 382: smscore_start_device(...) failed [ 13.540318] smsusb_onresponse: line: 118: error, urb status -2, 0 bytes [ 13.540444] smsusb_onresponse: line: 118: error, urb status -2, 0 bytes [ 13.540562] smsusb_onresponse: line: 118: error, urb status -2, 0 bytes [ 13.540686] smsusb_onresponse: line: 118: error, urb status -2, 0 bytes [ 13.540809] smsusb_onresponse: line: 118: error, urb status -2, 0 bytes [ 13.540940] smsusb_onresponse: line: 118: error, urb status -2, 0 bytes [ 13.541062] smsusb_onresponse: line: 118: error, urb status -2, 0 bytes [ 13.541186] smsusb_onresponse: line: 118: error, urb status -2, 0 bytes [ 13.541308] smsusb_onresponse: line: 118: error, urb status -2, 0 bytes [ 13.541443] smsusb_onresponse: line: 118: error, urb status -2, 0 bytes [ 13.541508] sms_ir_exit: [ 13.594131] r8169 0000:20:00.0: eth0: link down [ 13.594520] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.598563] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.631746] smsusb: probe of 2-1.1:1.0 failed with error -2 [ 13.631771] usbcore: registered new interface driver smsusb I looked for some additional driver in software-properties, but I only saw the additional drivers for my Graphic Video Card and my wifi card, and nothing about the tv tuner So i tried to install linux-firmware-nonfree, and then it started to work. I think we should add this tuner to the list in software-properties, shouldn't we? If not the fact it doesn't work when plugging it in and doesn't notify you the need to install some additional software may be confusing for a normal user To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1068356/+subscriptions _______________________________________________ Mailing list: https://launchpad.net/~mythbuntu-bugs Post to : [email protected] Unsubscribe : https://launchpad.net/~mythbuntu-bugs More help : https://help.launchpad.net/ListHelp
