On Tue, Feb 08, 2005 at 08:32:05PM +0800, Tj wrote: > Problem #1: > ~~~~~~~~ > I have two DVB-T cards (VisionPlus) on a combined frontend/backend machine. > > I'm in Australia and the times aren't very accurate, so I setup myth to > start record shows 4 minutes early and 10 minutes late. Lets say I > schedule two recordings (program A & program B) on different channels, > with end_time of program A == start_time of program B. > > Previously, MythTv will use card#1 to record program A, and then card#2 > to record program B. Today's CVS version of MythTV (08 Feb 05, 20:00 > Western Australian Time, basically the time of this email if your not in > WA) will use card#1 to record program A, and then use card#1 again to > record program B at end_time of program A (it didn't record past 10 > minutes). Doing this will render recording of program A useless as I > don't know what's the ending.
If you mean that you set the global start early/end late settings (rather than the program specific ones), then that's how it's always behaved. I don't think anything has changed. My CVS is a few weeks old, but that's how it's always behaved. > If this is by design, wouldn't the old method of using all two tuners be > better? I'm not sure exactly when this starts happening, probably in the > last 3-4 days? Is this a software fault or just a configuration error? > Previously I didn't have to set anything and mythtv would always grab > card#2 to record the second program. Only if you set per-program start/end adjustments. The behaviour you describe would be useful, but I don't think it's ever been in. Hamish -- Hamish Moffatt VK3SB <[EMAIL PROTECTED]> <[EMAIL PROTECTED]>
_______________________________________________ mythtv-dev mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
