I had the same problems too, until I moved my pvr350 into a dedicated backend. Even if I was using tvout of another video card and not the 350 tv out it would freeze. The moment I had a dedicated backend and dedicated frontend the issues went away.
On Wed, 16 Mar 2005 19:51:39 +0000, Tom Barber <[EMAIL PROTECTED]> wrote: > Robert Kulagowski wrote: > > >> Anyone else had this problem? > > > > > > No one can do anything with a post that has no details in it. > > _______________________________________________ > > mythtv-dev mailing list > > [email protected] > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev > > > Right, > I have a Semperon 2.8, > 512MB RAM > a 40GB IDE HD > Nvidia Geforce FX 128MB running the 7167 Nvidia driver > and 2 PVR 250's > running FC3 > IVTV 0.2.0 > Myth TV 0.17 > > It runs fine apart from it crashes solid often when rewinding pausing or > ffowarding live tv. > Also now and again it just freezes solid often with a high pitched > sqeeking coming through the speakers, it seems to happen more often when > recording tv, only crashes when watching TV as well. It doesn't just > crash the frontend I can't even ssh into the box. > I've checked the DMA settings and its on. > I've switched off acpi and apm. > > I'm not running out of harddrive space the /video partition. > > Filesystem Size Used Avail Use% Mounted on > /dev/hda2 9.7G 2.6G 6.7G 28% / > /dev/hda1 99M 14M 81M 15% /boot > none 252M 0 252M 0% /dev/shm > /dev/hda5 27G 3.9G 24G 15% /video > > so im at a bit of a loss. > I've included my xorg.conf and my latest dmesg and the ivtvinit section. > Thanks again > Tom > > > # XFree86 4 configuration created by pyxf86config > > Section "ServerLayout" > Identifier "Default Layout" > Screen 0 "Screen0" 0 0 > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > EndSection > > Section "Files" > > # RgbPath is the location of the RGB database. Note, this is the name of the > # file minus the extension (like ".txt" or ".db"). There is normally > # no need to change the default. > # Multiple FontPath entries are allowed (they are concatenated together) > # By default, Red Hat 6.0 and later now use a font server independent of > # the X server to render fonts. > RgbPath "/usr/X11R6/lib/X11/rgb" > ModulePath "/usr/X11R6/lib/modules/extensions/nvidia" > ModulePath "/usr/X11R6/lib/modules/extensions" > ModulePath "/usr/X11R6/lib/modules" > FontPath "unix/:7100" > EndSection > > Section "Module" > Load "dbe" > Load "extmod" > Load "v4l" > Load "fbdevhw" > Load "glx" > Load "record" > Load "freetype" > Load "type1" > EndSection > > Section "InputDevice" > > # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) > # Option "Xleds" "1 2 3" > # To disable the XKEYBOARD extension, uncomment XkbDisable. > # Option "XkbDisable" > # To customise the XKB settings to suit your keyboard, modify the > # lines below (which are the defaults). For example, for a non-U.S. > # keyboard, you will probably want to use: > # Option "XkbModel" "pc102" > # If you have a US Microsoft Natural keyboard, you can use: > # Option "XkbModel" "microsoft" > # > # Then to change the language, change the Layout setting. > # For example, a german layout can be obtained with: > # Option "XkbLayout" "de" > # or: > # Option "XkbLayout" "de" > # Option "XkbVariant" "nodeadkeys" > # > # If you'd like to switch the positions of your capslock and > # control keys, use: > # Option "XkbOptions" "ctrl:swapcaps" > # Or if you just want both to be control, use: > # Option "XkbOptions" "ctrl:nocaps" > # > Identifier "Keyboard0" > Driver "kbd" > Option "XkbModel" "pc105" > Option "XkbLayout" "gb" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "microsoft" > Option "Device" "/dev/ttyS0" > # Option "ZAxisMapping" "4 5" > Option "Emulate3Buttons" "yes" > EndSection > > Section "Monitor" > Identifier "Monitor0" > VendorName "Monitor Vendor" > ModelName "719B" > # DisplaySize 330 250 > HorizSync 30.0 - 50.0 > VertRefresh 60.0 > # Option "dpms" > EndSection > > Section "Device" > Identifier "Videocard0" > Driver "nvidia" > VendorName "Videocard vendor" > BoardName "NVIDIA GeForce FX (generic)" > Option "RenderAccel" "1" > Option "ConnectedMonitor" "TV" > Option "TVStandard" "PAL-I" > Option "TVOutFormat" "COMPOSITE" > # Option "TwinView" > # Option "SecondMonitorHorizSync" "30-50" > # Option "SecondMonitorVertRefresh" "60" > # Option "MetaModes" "1024x768, 1024x768; 800x600, 800x600; > 640x480, > 640x480;" > # Option "TVStandard" "PAL-I" > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Videocard0" > Monitor "Monitor0" > DefaultDepth 24 > SubSection "Display" > Viewport 0 0 > Depth 16 > Modes "800x600" "640x480" > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 24 > Modes "1024x768" "800x600" "640x480" > EndSubSection > EndSection > > Section "DRI" > Group 0 > Mode 0666 > EndSection > > > HighMem zone: 0 pages, LIFO batch:1 > DMI 2.3 present. > Built 1 zonelists > Kernel command line: ro root=LABEL=/ rhgb quiet acpi=off apic=off apic=no > apm=off pci=routeirq > Initializing CPU#0 > CPU 0 irqstacks, hard=c03d3000 soft=c03d2000 > PID hash table entries: 2048 (order: 11, 32768 bytes) > Detected 1666.562 MHz processor. > Using tsc for high-res timesource > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 514876k/524224k available (2045k kernel code, 8752k reserved, 655k > data, 160k init, 0k highmem) > Checking if this processor honours the WP bit even in supervisor mode... Ok. > Calibrating delay loop... 3268.60 BogoMIPS (lpj=1634304) > Security Framework v1.0.0 initialized > SELinux: Initializing. > SELinux: Starting in permissive mode > selinux_register_security: Registering secondary module capability > Capability LSM initialized as secondary > Mount-cache hash table entries: 512 (order: 0, 4096 bytes) > CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 > CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 256K (64 bytes/line) > CPU: After all inits, caps: 0383f3ff c1cbfbff 00000000 00000020 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU: AMD Sempron(tm) 2400+ stepping 01 > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Checking 'hlt' instruction... OK. > checking if image is initramfs... it is > Freeing initrd memory: 568k freed > NET: Registered protocol family 16 > PCI: PCI BIOS revision 2.10 entry at 0xfdae1, last bus=1 > PCI: Using configuration type 1 > mtrr: v2.0 (20020519) > ACPI: Subsystem revision 20041105 > ACPI: Interpreter disabled. > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI: ACPI disable > usbcore: registered new driver usbfs > usbcore: registered new driver hub > PCI: Probing PCI hardware > PCI: Probing PCI hardware (bus 00) > PCI: Via IRQ fixup > PCI: Using IRQ router default [1106/3177] at 0000:00:11.0 > PCI: IRQ 0 for device 0000:00:11.1 doesn't match PIRQ mask - try > pci=usepirqmask > PCI: Hardcoded IRQ 14 for device 0000:00:11.1 > apm: BIOS not found. > audit: initializing netlink socket (disabled) > audit(1111001002.690:0): initialized > Total HugeTLB memory allocated, 0 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > SELinux: Registering netfilter hooks > Initializing Cryptographic API > ksign: Installing public key data > Loading keyring > - Added public key C1F2FA57F7EECD64 > - User ID: Red Hat, Inc. (Kernel Module GPG key) > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > Real Time Clock Driver v1.12 > Linux agpgart interface v0.100 (c) Dave Jones > agpgart: Detected VIA KT400/KT400A/KT600 chipset > agpgart: Maximum main memory to use for agp memory: 439M > agpgart: AGP aperture is 64M @ 0xe0000000 > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered > RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize > divert: not allocating divert_blk for non-ethernet device lo > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > VP_IDE: IDE controller at PCI slot 0000:00:11.1 > PCI: Hardcoded IRQ 14 for device 0000:00:11.1 > VP_IDE: chipset revision 6 > VP_IDE: not 100% native mode: will probe irqs later > VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 > ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio > Probing IDE interface ide0... > hda: SAMSUNG SP0411N, ATA DISK drive > elevator: using anticipatory as default io scheduler > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > hdc: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive > ide1 at 0x170-0x177,0x376 on irq 15 > hda: max request size: 1024KiB > hda: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(133) > hda: cache flushes supported > hda: hda1 hda2 hda3 hda4 < hda5 > > hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.20 > ide-floppy driver 0.99.newide > usbcore: registered new driver hiddev > usbcore: registered new driver usbhid > drivers/usb/input/hid-core.c: v2.0:USB HID core driver > mice: PS/2 mouse device common for all mice > input: AT Translated Set 2 keyboard on isa0060/serio0 > md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 > NET: Registered protocol family 2 > IP: routing cache hash table of 1024 buckets, 32Kbytes > TCP: Hash tables configured (established 32768 bind 9362) > Initializing IPsec netlink socket > NET: Registered protocol family 1 > NET: Registered protocol family 17 > Freeing unused kernel memory: 160k freed > EXT3-fs: INFO: recovery required on readonly filesystem. > EXT3-fs: write access will be enabled during recovery. > kjournald starting. Commit interval 5 seconds > EXT3-fs: recovery complete. > EXT3-fs: mounted filesystem with ordered data mode. > SELinux: Disabled at runtime. > SELinux: Unregistering netfilter hooks > floppy0: no floppy controllers found > via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker > divert: allocating divert_blk for eth0 > eth0: VIA Rhine II at 0xdffffe00, 00:0b:6a:6f:11:47, IRQ 11. > eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. > ip_tables: (C) 2000-2002 Netfilter core team > eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 > Linux video capture interface: v1.00 > ivtv: no version for "struct_module" found: kernel tainted. > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.2.0 (rc3g) loading > ivtv: Linux version: 2.6.10-1.770_FC3 686 REGPARM 4KSTACKS gcc-3.4 > ivtv: In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 250 card > ivtv: Found an iTVC16 based chip > ivtv: Unreasonably low latency timer, setting to 64 (was 32) > ivtv: VIA PCI device: 0x3189 vendor: 0x1106 > tveeprom: Hauppauge: model = 32035, rev = B135, serial# = 6916180 > tveeprom: tuner = Temic 4066FY5 (idx = 35, type = 18) > tveeprom: tuner fmt = PAL(I) (eeprom = 0x10, v4l2 = 0x00000010) > tveeprom: audio_processor = MSP3415 (type = 6) > ivtv: i2c attach [client=tveeprom[0],ok] > ivtv: Tuner Type 18, Tuner formats 0x00000010, Radio: yes, Model 0x008914d5, > Revision 0x00000000 > ivtv: PAL tuner detected > ivtv: Radio detected > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > ivtv: i2c attach [client=(tuner unset),ok] > saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) > saa7115: detecting saa7115 client on address 0x42 > saa7115: writing init values > ivtv: i2c attach [client=saa7115[0],ok] > saa7115: status: (1E) 0x48, (1F) 0xc0 > msp34xx: init: chip=MSP3415G-B8 +nicam +simple +simpler +radio mode=simple > ivtv: i2c attach [client=MSP3415G-B8,ok] > msp3410: daemon started > ivtv: Encoder revision: 0x02040024 > ivtv: Encoder Firmware is buggy, use version 0x02040011 > ivtv: Configuring WinTV PVR 250 card with 5 streams > ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total > ivtv: Registered v4l2 device, streamtype 0 minor 0 > ivtv: Create DMA stream 1 > ivtv: Registered v4l2 device, streamtype 1 minor 32 > ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 224 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 24 > ivtv: Create stream 4 > ivtv: Registered v4l2 device, streamtype 4 minor 64 > ivtv: Setting Tuner 18 > tuner: type set to 18 (Temic PAL_I (4066 FY5)) by ivtv i2c driver #0 > ivtv: Setting audio matrix to input 3, output 1 > ivtv: Switching standard to PAL. > saa7115: decoder set norm PAL > saa7115: set audio: 0x01 > ivtv: Initialized WinTV PVR 250, card #0 > ivtv: Autodetected WinTV PVR 250 card > ivtv: Found an iTVC16 based chip > ivtv: Unreasonably low latency timer, setting to 64 (was 32) > ivtv: VIA PCI device: 0x3189 vendor: 0x1106 > tveeprom: Hauppauge: model = 32035, rev = B135, serial# = 6916325 > tveeprom: tuner = Temic 4066FY5 (idx = 35, type = 18) > tveeprom: tuner fmt = PAL(I) (eeprom = 0x10, v4l2 = 0x00000010) > tveeprom: audio_processor = MSP3415 (type = 6) > ivtv: i2c attach [client=tveeprom[1],ok] > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 > ivtv: i2c attach [client=(tuner unset),ok] > saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) > saa7115: detecting saa7115 client on address 0x42 > saa7115: writing init values > ivtv: i2c attach [client=saa7115[1],ok] > ivtv: ivtv_enc_thread: pid = 2460, itv = 0xe0a05020 > saa7115: status: (1E) 0x48, (1F) 0xc0 > msp34xx: init: chip=MSP3415G-B8 +nicam +simple +simpler +radio mode=simple > ivtv: i2c attach [client=MSP3415G-B8,ok] > msp3410: daemon started > ivtv: Tuner Type 18, Tuner formats 0x00000010, Radio: yes, Model 0x008914d5, > Revision 0x00000000 > ivtv: PAL tuner detected > ivtv: Radio detected > ivtv: Encoder revision: 0x02040024 > ivtv: Encoder Firmware is buggy, use version 0x02040011 > ivtv: Configuring WinTV PVR 250 card with 5 streams > ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total > ivtv: Registered v4l2 device, streamtype 0 minor 1 > ivtv: Create DMA stream 1 > ivtv: Registered v4l2 device, streamtype 1 minor 33 > ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 225 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 25 > ivtv: Create stream 4 > ivtv: Registered v4l2 device, streamtype 4 minor 65 > ivtv: Setting Tuner 18 > tuner: type set to 18 (Temic PAL_I (4066 FY5)) by ivtv i2c driver #1 > ivtv: Setting audio matrix to input 3, output 1 > ivtv: Switching standard to PAL. > saa7115: decoder set norm PAL > saa7115: set audio: 0x01 > ivtv: Initialized WinTV PVR 250, card #1 > ivtv: ==================== END INIT IVTV ==================== > ivtv: ivtv_enc_thread: pid = 2553, itv = 0xe0a194c0 > lirc_dev: IR Remote Control driver registered, at major 61 > bttv: driver version 0.9.15 loaded > bttv: using 8 buffers with 2080k (520 pages) each for capture > lirc_i2c: chip found @ 0x18 (Hauppauge IR) > ivtv: i2c attach [client=Hauppauge IR,ok] > lirc_dev: lirc_register_plugin:sample_rate: 10 > lirc_i2c: chip found @ 0x18 (Hauppauge IR) > ivtv: i2c attach [client=Hauppauge IR,ok] > lirc_dev: lirc_register_plugin:sample_rate: 10 > saa7115: starting probe for adapter SMBus Via Pro adapter at 0400 (0x0) > gameport: pci0000:00:0d.1 speed 1193 kHz > ehci_hcd 0000:00:10.3: EHCI Host Controller > ehci_hcd 0000:00:10.3: irq 12, pci mem 0xdfffff00 > ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 6 ports detected > USB Universal Host Controller Interface driver v2.2 > uhci_hcd 0000:00:10.0: UHCI Host Controller > uhci_hcd 0000:00:10.0: irq 11, io base 0xdc00 > uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > uhci_hcd 0000:00:10.1: UHCI Host Controller > uhci_hcd 0000:00:10.1: irq 10, io base 0xe000 > uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > uhci_hcd 0000:00:10.2: UHCI Host Controller > uhci_hcd 0000:00:10.2: irq 3, io base 0xe400 > uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > md: Autodetecting RAID arrays. > md: autorun ... > md: ... autorun DONE. > NET: Registered protocol family 10 > Disabled Privacy Extensions on device c03697c0(lo) > IPv6 over IPv4 tunneling driver > divert: not allocating divert_blk for non-ethernet device sit0 > nvidia: module license 'NVIDIA' taints kernel. > NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7167 Fri Feb 25 > 09:08:22 PST 2005 > agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. > agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode > agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode > agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. > agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode > agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode > spurious 8259A interrupt: IRQ7. > eth0: no IPv6 routers present > EXT3 FS on hda2, internal journal > device-mapper: 4.3.0-ioctl (2004-09-30) initialised: [EMAIL PROTECTED] > hdc: command error: status=0x51 { DriveReady SeekComplete Error } > hdc: command error: error=0x54 > ide: failed opcode was 100 > ATAPI device hdc: > Error: Illegal request -- (Sense key=0x05) > Read of scrambled sector without authentication -- (asc=0x6f, ascq=0x03) > The failed "Read 10" packet command was: > "28 00 00 2f 90 a0 00 00 01 00 00 00 00 00 00 00 " > end_request: I/O error, dev hdc, sector 12468864 > kjournald starting. Commit interval 5 seconds > EXT3 FS on hda1, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > SGI XFS with ACLs, security attributes, large block numbers, no debug enabled > SGI XFS Quota Management subsystem > XFS mounting filesystem hda5 > Starting XFS recovery on filesystem: hda5 (dev: hda5) > Ending XFS recovery on filesystem: hda5 (dev: hda5) > Adding 522104k swap on /dev/hda3. Priority:-1 extents:1 > ieee1394: Initialized config rom entry `ip1394' > ip_tables: (C) 2000-2002 Netfilter core team > ip_tables: (C) 2000-2002 Netfilter core team > lp: driver loaded but no devices found > saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0 > saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder disable output > saa7115: decoder enable output > saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0 > saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder disable output > saa7115: decoder enable output > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set size > saa7115: decoder disable output > saa7115: decoder enable output > application mythfrontend uses obsolete OSS audio interface > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder disable output > saa7115: decoder enable output > saa7115: decoder disable output > saa7115: decoder enable output > > > Mar 16 18:26:44 mythtv kernel: Linux video capture interface: v1.00 > Mar 16 18:26:44 mythtv kernel: ivtv: no version for "struct_module" found: > kerne > l tainted. > Mar 16 18:26:44 mythtv kernel: ivtv: ==================== START INIT IVTV > ====== > ============== > Mar 16 18:26:44 mythtv kernel: ivtv: version 0.2.0 (rc3g) loading > Mar 16 18:26:44 mythtv kernel: ivtv: Linux version: 2.6.10-1.770_FC3 686 > REGPARM > 4KSTACKS gcc-3.4 > Mar 16 18:26:44 mythtv kernel: ivtv: In case of problems please include the > debu > g info > Mar 16 18:26:44 mythtv cups: cupsd startup succeeded > Mar 16 18:26:44 mythtv kernel: ivtv: between the START INIT IVTV and END INIT > IV > TV lines when > Mar 16 18:26:44 mythtv kernel: ivtv: mailing the ivtv-devel mailinglist. > Mar 16 18:26:44 mythtv kernel: ivtv: Autodetected WinTV PVR 250 card > Mar 16 18:26:44 mythtv sshd: succeeded > Mar 16 18:26:44 mythtv kernel: ivtv: Found an iTVC16 based chip > Mar 16 18:26:44 mythtv kernel: ivtv: Unreasonably low latency timer, setting > to > 64 (was 32) > Mar 16 18:26:44 mythtv kernel: ivtv: VIA PCI device: 0x3189 vendor: 0x1106 > Mar 16 18:26:44 mythtv kernel: tveeprom: Hauppauge: model = 32035, rev = > B135, s > erial# = 6916180 > Mar 16 18:26:44 mythtv kernel: tveeprom: tuner = Temic 4066FY5 (idx = 35, > type = > 18) > Mar 16 18:26:44 mythtv kernel: tveeprom: tuner fmt = PAL(I) (eeprom = 0x10, > v4l2 > = 0x00000010) > Mar 16 18:26:44 mythtv kernel: tveeprom: audio_processor = MSP3415 (type = 6) > Mar 16 18:26:44 mythtv kernel: ivtv: i2c attach [client=tveeprom[0],ok] > Mar 16 18:26:44 mythtv kernel: ivtv: Tuner Type 18, Tuner formats 0x00000010, > Ra > dio: yes, Model 0x008914d5, Revision 0x00000000 > Mar 16 18:26:44 mythtv kernel: ivtv: PAL tuner detected > Mar 16 18:26:44 mythtv kernel: ivtv: Radio detected > Mar 16 18:26:44 mythtv kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv > i2c d > river #0 > Mar 16 18:26:44 mythtv xinetd: xinetd startup succeeded > Mar 16 18:26:44 mythtv kernel: ivtv: i2c attach [client=(tuner unset),ok] > Mar 16 18:26:45 mythtv kernel: saa7115: starting probe for adapter ivtv i2c > driv > er #0 (0x10005) > Mar 16 18:26:45 mythtv kernel: saa7115: detecting saa7115 client on address > 0x42 > Mar 16 18:26:45 mythtv kernel: saa7115: writing init values > Mar 16 18:26:45 mythtv kernel: ivtv: i2c attach [client=saa7115[0],ok] > Mar 16 18:26:45 mythtv kernel: saa7115: status: (1E) 0x48, (1F) 0xc0 > Mar 16 18:26:45 mythtv kernel: msp34xx: init: chip=MSP3415G-B8 +nicam +simple > +s > impler +radio mode=simple > Mar 16 18:26:45 mythtv kernel: ivtv: i2c attach [client=MSP3415G-B8,ok] > Mar 16 18:26:45 mythtv kernel: msp3410: daemon started > Mar 16 18:26:45 mythtv kernel: ivtv: Encoder revision: 0x02040024 > Mar 16 18:26:45 mythtv kernel: ivtv: Encoder Firmware is buggy, use version > 0x02 > 040011 > Mar 16 18:26:45 mythtv kernel: ivtv: Configuring WinTV PVR 250 card with 5 > strea > ms > Mar 16 18:26:45 mythtv kernel: ivtv: Create DMA stream 0 using 256 16384 byte > bu > ffers 4194304 kbytes total > Mar 16 18:26:45 mythtv kernel: ivtv: Registered v4l2 device, streamtype 0 > minor > 0 > Mar 16 18:26:45 mythtv kernel: ivtv: Create DMA stream 1 > Mar 16 18:26:45 mythtv kernel: ivtv: Registered v4l2 device, streamtype 1 > minor > 32 > Mar 16 18:26:45 mythtv kernel: ivtv: Create stream 2 using 40 52224 byte > buffers > 2097152 kbytes total > Mar 16 18:26:45 mythtv kernel: ivtv: Registered v4l2 device, streamtype 2 > minor > 224 > Mar 16 18:26:45 mythtv kernel: ivtv: Create DMA stream 3 using 455 4608 byte > buf > fers 2097152 kbytes total > Mar 16 18:26:45 mythtv kernel: ivtv: Registered v4l2 device, streamtype 3 > minor > 24 > Mar 16 18:26:45 mythtv kernel: ivtv: Create stream 4 > Mar 16 18:26:45 mythtv kernel: ivtv: Registered v4l2 device, streamtype 4 > minor > 64 > Mar 16 18:26:45 mythtv kernel: ivtv: Setting Tuner 18 > Mar 16 18:26:45 mythtv kernel: tuner: type set to 18 (Temic PAL_I (4066 FY5)) > by > ivtv i2c driver #0 > Mar 16 18:26:45 mythtv kernel: ivtv: Setting audio matrix to input 3, output 1 > Mar 16 18:26:45 mythtv kernel: ivtv: Switching standard to PAL. > Mar 16 18:26:45 mythtv kernel: saa7115: decoder set norm PAL > Mar 16 18:26:45 mythtv kernel: saa7115: set audio: 0x01 > Mar 16 18:26:45 mythtv kernel: ivtv: Initialized WinTV PVR 250, card #0 > Mar 16 18:26:45 mythtv kernel: ivtv: Autodetected WinTV PVR 250 card > Mar 16 18:26:45 mythtv xinetd[4968]: xinetd Version 2.3.13 started with > libwrap > loadavg options compiled in. > Mar 16 18:26:45 mythtv kernel: ivtv: Found an iTVC16 based chip > Mar 16 18:26:45 mythtv xinetd[4968]: Started working: 0 available services > Mar 16 18:26:45 mythtv kernel: ivtv: Unreasonably low latency timer, setting > to > 64 (was 32) > Mar 16 18:26:45 mythtv kernel: ivtv: VIA PCI device: 0x3189 vendor: 0x1106 > Mar 16 18:26:45 mythtv kernel: tveeprom: Hauppauge: model = 32035, rev = > B135, s > erial# = 6916325 > Mar 16 18:26:45 mythtv kernel: tveeprom: tuner = Temic 4066FY5 (idx = 35, > type = > 18) > Mar 16 18:26:45 mythtv kernel: tveeprom: tuner fmt = PAL(I) (eeprom = 0x10, > v4l2 > = 0x00000010) > Mar 16 18:26:45 mythtv kernel: tveeprom: audio_processor = MSP3415 (type = 6) > Mar 16 18:26:45 mythtv kernel: ivtv: i2c attach [client=tveeprom[1],ok] > Mar 16 18:26:45 mythtv kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv > i2c d > river #1 > Mar 16 18:26:45 mythtv kernel: ivtv: i2c attach [client=(tuner unset),ok] > Mar 16 18:26:45 mythtv kernel: saa7115: starting probe for adapter ivtv i2c > driv > er #1 (0x10005) > Mar 16 18:26:45 mythtv kernel: saa7115: detecting saa7115 client on address > 0x42 > Mar 16 18:26:45 mythtv kernel: saa7115: writing init values > Mar 16 18:26:45 mythtv kernel: ivtv: i2c attach [client=saa7115[1],ok] > Mar 16 18:26:45 mythtv kernel: ivtv: ivtv_enc_thread: pid = 2460, itv = > 0xe0a050 > 20 > Mar 16 18:26:45 mythtv kernel: saa7115: status: (1E) 0x48, (1F) 0xc0 > Mar 16 18:26:45 mythtv kernel: msp34xx: init: chip=MSP3415G-B8 +nicam +simple > +s > impler +radio mode=simple > Mar 16 18:26:45 mythtv kernel: ivtv: i2c attach [client=MSP3415G-B8,ok] > Mar 16 18:26:45 mythtv kernel: msp3410: daemon started > Mar 16 18:26:45 mythtv kernel: ivtv: Tuner Type 18, Tuner formats 0x00000010, > Ra > dio: yes, Model 0x008914d5, Revision 0x00000000 > Mar 16 18:26:45 mythtv kernel: ivtv: PAL tuner detected > Mar 16 18:26:45 mythtv kernel: ivtv: Radio detected > Mar 16 18:26:45 mythtv kernel: ivtv: Encoder revision: 0x02040024 > Mar 16 18:26:45 mythtv kernel: ivtv: Encoder Firmware is buggy, use version > 0x02 > 040011 > Mar 16 18:26:45 mythtv kernel: ivtv: Configuring WinTV PVR 250 card with 5 > strea > ms > Mar 16 18:26:45 mythtv kernel: ivtv: Create DMA stream 0 using 256 16384 byte > bu > ffers 4194304 kbytes total > Mar 16 18:26:45 mythtv kernel: ivtv: Registered v4l2 device, streamtype 0 > minor > 1 > Mar 16 18:26:45 mythtv kernel: ivtv: Create DMA stream 1 > Mar 16 18:26:45 mythtv kernel: ivtv: Registered v4l2 device, streamtype 1 > minor > 33 > Mar 16 18:26:45 mythtv kernel: ivtv: Create stream 2 using 40 52224 byte > buffers > 2097152 kbytes total > Mar 16 18:26:45 mythtv kernel: ivtv: Registered v4l2 device, streamtype 2 > minor > 225 > Mar 16 18:26:45 mythtv kernel: ivtv: Create DMA stream 3 using 455 4608 byte > buf > fers 2097152 kbytes total > Mar 16 18:26:45 mythtv kernel: ivtv: Registered v4l2 device, streamtype 3 > minor > 25 > Mar 16 18:26:45 mythtv kernel: ivtv: Create stream 4 > Mar 16 18:26:45 mythtv kernel: ivtv: Registered v4l2 device, streamtype 4 > minor > 65 > Mar 16 18:26:45 mythtv kernel: ivtv: Setting Tuner 18 > Mar 16 18:26:45 mythtv kernel: tuner: type set to 18 (Temic PAL_I (4066 FY5)) > by > ivtv i2c driver #1 > Mar 16 18:26:45 mythtv kernel: ivtv: Setting audio matrix to input 3, output 1 > Mar 16 18:26:45 mythtv kernel: ivtv: Switching standard to PAL. > Mar 16 18:26:45 mythtv kernel: saa7115: decoder set norm PAL > Mar 16 18:26:45 mythtv kernel: saa7115: set audio: 0x01 > Mar 16 18:26:45 mythtv kernel: ivtv: Initialized WinTV PVR 250, card #1 > Mar 16 18:26:45 mythtv kernel: ivtv: ==================== END INIT IVTV > ====== > ============== > Mar 16 18:26:45 mythtv kernel: ivtv: ivtv_enc_thread: pid = 2553, itv = > 0xe0a194 > c0 > > > _______________________________________________ > mythtv-dev mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev > > > _______________________________________________ mythtv-dev mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
