On Sun, 2005-04-10 at 14:38 +1000, Andrew Dennison wrote: > John Pullan wrote: > > All, > > The attached patch attempts to do a full scan for channels, i.e no > > entering of tuning parameters. I've got it working for the UK, on my box > > using a Nova-T :). I've also tried to enter some information for Finland > > and Sweden, but I'm looking for information/feedback for more countries. > > With the attached patch for Australian frequencies fullscan worked for me. >
Great. > The patch should cover all AU frequencies, including the +125kHz offset > that some channels use. I've left most parameters as AUTO except QAM > (due to cut'n'paste:) as that worked for me. FYI all transports I can > see are also TRANSMISSION_MODE_8K. > > Both my cards (old Nova-T and DVICO lite) seem to be happy with auto > everything - infact If I remember correctly the driver for my old nova-T > card igmores any parameters you specify and just uses auto anyway. > > Only issue I had was scanning on my second card failed - seemed like it > was still trying the first card which wasn't working at the time? > Console messages indicated it was using the second card but the scan > never progressed. I'll look into this. > > Once I got the first card working again the scan completed successfully. Anyway, I've updated the patch on http://www.digitalregime.com/mythdvb/ to include your changes. Thanks for your help. -- John Pullan <[EMAIL PROTECTED]>
_______________________________________________ mythtv-dev mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
