Hi all,
Thanks for that Andrew. I'm gradually gaining a
greater understanding of
what's going on. I suspect that the reason that I'm
not having much
success might have something to do with the versions
of Neutrino I've
been trying. I'm guessing that this patch is not
compatible with either
Sportster 1.61 or Next-Generation g5401. What
version of Neutrino are
you running?
mythbackend is successfully doing the following:
1. Retrieves the channel list
2. Works out which from the channel list which
channel ID matches the
default channel I've given it.
3. Switches channel (on the dbox) to the default
channel that I've given it.
4. When not in WatchingTV mode, polls the small
group of channels I've
listed in mythsetup
Things go wrong when it tries to grab the TS stream.
I've verified by
querying the web interface myself that the pids it
retrieves are right.
This is what I get in the mythbackend.log file:
2005-05-30 12:52:41.035 Changing from None to
WatchingLiveTV
2005-05-30 12:52:41.040 TVRec::SetupRecorder()
Initializing DBOX2 on
Host: 192.1
68.28.8, Streaming-Port: 31338, Http-Port: 80
2005-05-30 12:52:41.041 DBOX#1: Instantiating
recorder.
2005-05-30 12:52:41.042 DBOX#1: Recorder now online.
Deactivating EPG scan
2005-05-30 12:52:41.044 DBOX#1: Channel
instantiated.
2005-05-30 12:52:41.045 DBOX#1: Channel destructed.
2005-05-30 12:52:41.048 DBOX#1: Channel
instantiated.
2005-05-30 12:52:41.049 DBOX#1: Channel destructed.
2005-05-30 12:52:41.050 DBOX#1: Initializing Host:
192.168.28.8,
Streaming-Port:
31338, Http-Port: 80
2005-05-30 12:52:41.051 DBOX#1: Retrieving PIDs from
192.168.28.8:80...
2005-05-30 12:52:41.085 DBOXEPG#1: EPG received.
Parsing 338 bytes...
2005-05-30 12:52:41.092 DBOXEPG#1: EPG parsing done.
Got 2 shows for
channel 7.
2005-05-30 12:52:41.095 DBOX#1: EPG finished.
Recorder still online.
Deactivatin
g EPG scan
2005-05-30 12:52:41.098 DBOX#1: Retrieving PIDs
succeeded. Parsing...
2005-05-30 12:52:41.099 DBOX#1: Opening pids 7941
(0x1f05) 8101 (0x1fa5)
8149 (0
x1fd5)
2005-05-30 12:52:41.102 DBOX#1: Sending Request 'GET
/1f05,1fa5,1fd5
HTTP/1.0'
2005-05-30 12:52:41.103 DBOX#1: Creating PAT for PMT
pid -1.
2005-05-30 12:52:41.193 DBOX#1: No TS header.
2005-05-30 12:52:41.420 DBOX#1: TS header at 42, not
in sync.
2005-05-30 12:52:52.423 Changing from WatchingLiveTV
to None
2005-05-30 12:53:07.421 Couldn't read data from the
capture card in 15
seconds.
Stopping.
2005-05-30 12:53:07.423 DBOX#1: Recorder now
offline. Reactivating EPG scan
I suspect that the last the "TS header at 42" line
might contain the
clue. Can anyone shed any light on this?
Cheers,
John
Andrew wrote:
On Monday 30 May 2005 01:08, John McEleney wrote:
Hi all,
I've managed to build Myth with this patch, but
cannot get the channels
working. I've added my Dbox2 as a capture card,
I've created a Video
Source and added just one channel to it. I then
associated the Dbox to
this video sources in the "Input Connections"
section. The Dbox is has
spts turned "on".
When I open mythfrontend, and "Watch TV" I see
flashes of the channel
currently selected on the Dbox. It occasionally
shows a few frames of
jerky video and freezes again. Maybe it's
constantly trying to switch
channel and failing? I'm must be missing something
really obvious, but I
can't see what. How am I supposed to generate a
valid channel list? Can
anyone help?
Thanks,
John
_______________________________________________
mythtv-dev mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
In the channel editor in mythtv-setup, the channel
name must be exactly as it
appears on the dbox2, including case. The channel
number must much the
channel name on the dbox2, the frequency id on the
seccond page of the
channel editor must have the same number as the
channel on the dbox2.
The callsign can be whatever you want, im not sure
if the channel number must
be the same as on the dbox2 but I know the
frequency id must be, I just set
both to the same number.
I have it working reasonably well, but sometimes I
get no picture after a
channel change, exiting and re entering live tv
brings it back.
Hope this helps.
Andrew.
_______________________________________________
mythtv-dev mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
_______________________________________________
mythtv-dev mailing list
[email protected]
