On Sat, 2005-06-18 at 12:30 +0200, Torbjörn Jansson wrote: > After updateing to latest cvs i now get the following when starting the > backend: > --- > Starting up as the master server. > 2005-06-18 12:17:56.284 DVB#0 DVB SI Table Parser Started > 2005-06-18 12:17:56.896 DVB#0 Using DVB card 0, with frontend VLSI VES1820 > DVB-C. > 2005-06-18 12:17:56.900 DVB#0 CA: CI handler successfully initialized! > 2005-06-18 12:17:56.900 DVB#0 CA: CI handler thread running > 2005-06-18 12:17:56.920 DVB WARNING - Invalid constellation/modulation > parameter 'a', falling back to 'auto'. > 2005-06-18 12:17:56.942 DVB#0 WARNING - Unsupported modulation parameter. > 2005-06-18 12:17:57.311 DVB#0 DVB signal c8c8 | snr aeae | ber 0 | unc > ffffffff > 2005-06-18 12:17:58.243 DVB#0 DVB signal ffff | snr acac | ber 0 | unc > ffffffff > 2005-06-18 12:17:59.179 DVB#0 DVB signal ffff | snr afaf | ber 9ffff6 | unc > ffffffff > <lots of similar lines cut> > 2005-06-18 12:18:29.005 DVB#0 WARNING - Status: NO LOCK! > 2005-06-18 12:18:29.009 DVB#0 ERROR - Tuning for channel #1038 failed. > --- > > Any idea why this happends now? > Scanning seems to have the same problem, not a single transport is able to > tune. > > It worked just fine yesterday before i updated.
It is probably something in dvbtypes. I just checked parseModulation(), found a couple of extra spaces in the auto and 16-vsb strings, but they shouldn't have caused you any trouble. Can you tune to a service with cvs from before the dvbchannel.cpp commit and after it, both with '-v channel,record,siparser' ? That -v channel should print out the DVBTuning class in both cases, and the record and siparser should help if it is something else. -- Daniel
_______________________________________________ mythtv-dev mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
