On Wed, 2005-07-13 at 13:23 +1000, Damion de Soto wrote: > Joel Utting wrote: > > I'm in Australia and I'm trying to track down a > > problem which I've had for some time with a certain > > channel. We have several free to air channels, two of > > which are 7 and 9. When I go to 7 from the menu it the same > > works fine. We I then go to 9 and back to 7, 7 iso > > always missing its sound, and sometimes goes into slow > > motion. This has happened with the 0.18 version of > > myth and with the current svn. It has happened > > consistently on 4 different machines, the only > > similarity (I believe) is they have all been running > > visionPlus cards (different ones). > > > > I have tried a lot of small changes in the code to fix > > this problem but have not had any success - anything I > > can try that might help ? > Isn't this just the audio problem with using the TS DVB data stream? > It depends on the details of the audio stream on the current, and last > channel. > If you change to PS, it should go away. (or you may be able to just switch > audio > streams with the + key when using TS (I think)). > > regards, > I'm also in Australia and using a vision plus, I started getting similar problems with 0.17 and it continued when I install 0.18 I switched to TS from PS and so far it appears to have solved the problem. I was getting audio loss when changing channels and occasional audio loss during a recording (quite often on ABC while watching Denton). I switched over about 3 weeks ago and it seems good so far.
regds Matt > _______________________________________________ > mythtv-dev mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
_______________________________________________ mythtv-dev mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
