Hi. I'm attempting to watch HDTV recorded in Australia (on DVB-T). The backend logs show that a test program was recorded fine (no DVB errors reported). However when I play back the recording, the frontend logs MPEG decoder errors continuously.
2005-07-28 23:11:37.252 Changing from None to WatchingPreRecorded 2005-07-28 23:11:37.253 Using realtime priority. 2005-07-28 23:11:37.377 Video timing method: SGI OpenGL [mpeg2video @ 0xb7765010]ac-tex damaged at 68 21 [mpeg2video @ 0xb7765010]Warning MVs not available [mpeg2video @ 0xb7765010]invalid cbp at 26 17 [mpeg2video @ 0xb7765010]ac-tex damaged at 51 39 [mpeg2video @ 0xb7765010]ac-tex damaged at 62 53 [mpeg2video @ 0xb7765010]invalid cbp at 58 40 [mpeg2video @ 0xb7765010]invalid cbp at 51 50 [mpeg2video @ 0xb7765010]ac-tex damaged at 54 37 [...] I get a few of those every second or two. The picture breaks up briefly every few seconds also. Sound is fine. I posted two samples of the recording; being 1080i, the data rate is very high. 5.7Gb for 80 minutes in total. 10Mb version: http://www.risingsoftware.com/~hamish/hdtv/shorthdtv.mpg 30Mb version: http://www.risingsoftware.com/~hamish/hdtv/shorthdtv2.mpg This is recorded from channel 10 in Melbourne, for any Aussie readers. The CPU (AthlonXP 2600+) is about 50% idle. (GF4MX440 video, using Xv but not Xvmc.) Tried libmpeg decoding as well but it was no better. I remember a discussion a while ago about separate PCR streams in Australia that weren't recorded or used properly or similar. Is that the problem here? Hamish -- Hamish Moffatt VK3SB <[EMAIL PROTECTED]> <[EMAIL PROTECTED]>
_______________________________________________ mythtv-dev mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
