> > not sure why but livetv is not working for me at the moment with HEAD. > > recording and watching the recording works ok (which is what I > > normally use) DVBt of course. seems to crash backend though process is > > still there but backend wont respond to frontend requests. wierd. > > havent traced it yet. just mentioning it in case it jolts something in > > someones head (probably daniel :) cheers mark > > works for me. always does :-)
I noticed there is no tune phase entering livetv record. Is this a problem? however this happens as a separate dvbchannel open/close phase in a non livetv recording and that works too ( failed once for me today though, partial log follows, no helpful details unfortunately. the one after recorded ok on same channel immediately following. is tune time marginal? or is some sort of feedback being used. havent checked code. easier to ask ;-). I have a log with all verbose on for the backend (attached). backend doesnt crash but frontend eventually does. backend no longer resoponds to requests from the frontend after. sorry no trace as yet. too busy today. will probably have time next weekend to chase this cheers mark 2005-08-21 14:00:02.896 Started recording "V8 Superstars" on channel: 1000 on cardid: 1, sourceid 1 2005-08-21 14:00:02.920 DVB#0 Opening DVB channel 2005-08-21 14:00:03.176 DVB#0 Using DVB card 0, with frontend Philips TDA10045H DVB-T. 2005-08-21 14:00:04.746 DVB#0 Trying to tune to channel 10. 2005-08-21 14:00:05.258 DVB#0 Frequency: 219500000 BW: 7MHz HP: 3/4 LP: 1/2C: QAM-64 TM: 8K H: None GI: 1/16 2005-08-21 14:00:05.262 DVB#0 Waiting for frontend event after tune. 2005-08-21 14:00:05.288 DVB#0 Frequency tuning successful. 2005-08-21 14:00:05.289 DVB#0 Tuned to frequency for channel 10. 2005-08-21 14:00:05.290 DVB#0 Closing DVB channel 2005-08-21 14:00:08.959 Changing from None to RecordingOnly 2005-08-21 14:00:09.513 Prog title: V8 Superstars 2005-08-21 14:00:09.574 DVB#0 Opening DVB channel 2005-08-21 14:00:09.577 DVB#0 Using DVB card 0, with frontend Philips TDA10045H DVB-T. 2005-08-21 14:00:09.628 DVBSignalMonitor: initial flags 0x7400000 2005-08-21 14:00:09.631 SignalMonitor::Start() -- begin 2005-08-21 14:00:09.635 SignalMonitor::Start() -- end 2005-08-21 14:00:09.683 DVB#0 Signal Lock 2005-08-21 14:00:09.702 DVBSignalMonitor::Stop() -- begin 2005-08-21 14:00:09.765 DVBSignalMonitor::Stop() -- end 2005-08-21 14:00:09.799 prog_num(-1) vs. dvbc->srv_id(1585) 2005-08-21 14:00:09.918 DVB#0 DVB SI Table Parser Started 2005-08-21 14:00:10.985 TVRec: DVB Recorder's PMT NOT SET. 2005-08-21 14:00:10.987 StartRecorderPost() -- failed 2005-08-21 14:00:11.204 DVB#0 Closing DVB channel 2005-08-21 15:30:02.192 Started recording "RPM" on channel: 1000 on cardid: 1, sourceid 1 2005-08-21 15:30:02.194 DVB#0 Opening DVB channel 2005-08-21 15:30:02.770 DVB#0 Using DVB card 0, with frontend Philips TDA10045H DVB-T. 2005-08-21 15:30:02.772 DVB#0 Trying to tune to channel 10. 2005-08-21 15:30:02.794 DVB#0 Frequency: 219500000 BW: 7MHz HP: 3/4 LP: 1/2C: QAM-64 TM: 8K H: None GI: 1/16 2005-08-21 15:30:02.814 DVB#0 Waiting for frontend event after tune. 2005-08-21 15:30:02.834 DVB#0 Frequency tuning successful. 2005-08-21 15:30:02.854 DVB#0 Tuned to frequency for channel 10. 2005-08-21 15:30:02.874 DVB#0 Closing DVB channel 2005-08-21 15:30:03.699 Changing from None to RecordingOnly 2005-08-21 15:30:04.329 Prog title: RPM 2005-08-21 15:30:04.331 DVB#0 Opening DVB channel 2005-08-21 15:30:04.332 DVB#0 Using DVB card 0, with frontend Philips TDA10045H DVB-T. 2005-08-21 15:30:04.382 DVBSignalMonitor: initial flags 0x7400000 2005-08-21 15:30:04.385 SignalMonitor::Start() -- begin 2005-08-21 15:30:04.388 SignalMonitor::Start() -- end 2005-08-21 15:30:04.437 DVB#0 Signal Lock 2005-08-21 15:30:04.456 DVBSignalMonitor::Stop() -- begin 2005-08-21 15:30:04.490 DVBSignalMonitor::Stop() -- end 2005-08-21 15:30:04.493 prog_num(-1) vs. dvbc->srv_id(1585) 2005-08-21 15:30:04.496 DVB#0 DVB SI Table Parser Started 2005-08-21 15:30:05.098 DVB#0 SetPMT ServiceID=1585, PCRPID=128 (0x80) 2005-08-21 15:30:05.107 Waiting for recorder to start 2005-08-21 15:30:05.197 Recorder to started 2005-08-21 15:30:05.178 DVB#0 Data read from DMX - This is for debugging with transform.c
mythbackend.log.bz2
Description: Binary data
_______________________________________________ mythtv-dev mailing list [EMAIL PROTECTED] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
