ok so I made some more progress, seems as though the cx22702 driver doesn't ignore INVERSION..
my database of course has INVERSION_ON.. my dvico (mt352) ignores INVERSION thus i never knew i had a problem. If i change the DB multiplex's to INVERSION_OFF then it works :) ps i can emulate this in tzap as well :) so problem solvered - although i would like to know if channel-scanning puts inversion in the db wrongly? cheers dave On 10/12/05, David Shirley <[EMAIL PROTECTED]> wrote: > > Alright so I made some progress. > > Looks like mythtv never gets "IsLocked" inside > ./libs/libmythtv/dvbsignalmonitor.cpp ie we never get FE_HAS_LOCK > > Now I know tzap does get FE_HAS_LOCK because it says it does :) > > So it seems that mythtv does something different in card init/setup that tzap > does. > > Anyone got any ideas? > > Cheers > Dave > > > > > > On 10/12/05, David Shirley <[EMAIL PROTECTED]> wrote: > > Hi All, > > > > I got a new DVB-T card (Leadtek Winfast DTV1000-T) its a LR6650 clone. > > > > Anyways I built a new backend to test it and it doesn't work. > > > > However if I make this new backend a slave to the other master backend then > > the card works fine. > > > > Also the card works with tzap/dvbstream->mplayer.. > > > > Any ideas? > > > > Cheers > > Dave > > > > 2005-10-12 09:35: 34.567 Estimated program length: 60 minutes, size: 10406 > > MB, free space: 151976 MB > > 2005-10-12 09:35:34.576 TVRec(1): ClearFlags(AskAllowRecording,) -> > > RunMainLoop, > > 2005-10-12 09:35:34.692 TVRec(1): ClearFlags(CancelNextRecording,) -> > > RunMainLoop, > > 2005-10-12 09:35:34.829 Started recording: Heartbeat "Music of the > > Spheres": channel 1007 on cardid 1, sourceid 1 > > 2005-10-12 09:35:34.834 write -> 15 45 > > BACKEND_MESSAGE[]:[]SCHEDULE_CHANGE[]:[]empty > > 2005-10-12 09:35:34.852 read <- 14 19 QUERY_GETALLPENDING > > 2005-10-12 09:35:34.857 write -> 14 565 0[]:[]1[]:[]Heartbeat[]:[]Music > > of the Spheres[]:[]A Polish music... > > 2005-10-12 09:35:35.840 TVRec(1): Changing from None to RecordingOnly > > 2005-10-12 09:35:35.860 TVRec(1): > > ClearFlags(FrontendReady,CancelNextRecording,) -> RunMainLoop, > > 2005-10-12 09:35:35.876 TVRec(1): SetFlags(AskAllowRecording,) -> > > RunMainLoop,AskAllowRecording, > > 2005-10-12 09:35: 35.890 TVRec(1): Request: Program(yes) channel() input() > > flags(Recording,) > > 2005-10-12 09:35:35.893 TVRec(1): > > ClearFlags(WaitingForSIParser,SIParserRunning,) -> > > RunMainLoop,AskAllowRecording, > > 2005-10-12 09:35:35.897 TVRec(1): ClearFlags(WaitingForSignal,) -> > > RunMainLoop,AskAllowRecording, > > 2005-10-12 09:35:35.901 TVRec(1): ClearFlags(PENDINGACTIONS,) -> > > RunMainLoop,AskAllowRecording, > > 2005-10-12 09:35:35.906 DVB#0 Opening DVB channel > > 2005-10-12 09:35:35.909 DVB#0 SetChannelByString(7) > > 2005-10-12 09:35:35.914 DVB#0 Frequency: 177500000 BW: 7MHz HP: 2/3 LP: > > 1/2C: QAM-64 TM: 8K H: None GI: 1/8 > > 2005-10-12 09:35:35.917 DVB#0 Old Params: freq(219500000) type(OFDM) > > 2005-10-12 09:35:35.921 DVB#0 New Params: freq(177500000) type(OFDM) > > 2005-10-12 09:35:35.957 dvbchannel.cpp:wait_for_backend: Status: Signal, > > 2005-10-12 09:35:35.961 DVB#0 DVBChannel::Tune: Frequency tuning successful. > > 2005-10-12 09:35:35.965 DVB#0 Tuned to frequency for channel 7. > > 2005-10-12 09:35:35.969 TVRec(1): Starting Signal Monitor > > 2005-10-12 09:35:35.973 TVRec(1): SetupSignalMonitor() > > 2005-10-12 09:35:35.977 DVB#0 Opening DVB channel > > 2005-10-12 09:35:36.002 SM(0)::AddFlags: Seen() Match() > > Wait(Sig,SNR,BER,UB,) > > 2005-10-12 09:35:36.005 DVBSM(0)::constructor(): initial flags 0x7400000 > > 2005-10-12 09:35:36.009 TVRec(1): Signal monitor successfully created > > 2005-10-12 09:35:36.014 TVRec(1): Setting up table monitoring. > > 2005-10-12 09:35:36.017 TVRec(1): MPEG program number: 1328 > > 2005-10-12 09:35:36.022 DTVSM(0)::SetProgramNumber(1328): > > 2005-10-12 09:35:36.025 SM(0)::RemoveFlags: Seen(PMT,) Match(PMT,) Wait() > > 2005-10-12 09:35:36.029 SM(0)::AddFlags: Seen() Match() Wait(PMT,) > > 2005-10-12 09:35:36.034 SM(0)::AddFlags: Seen() Match() Wait(PAT,PMT,) > > 2005-10-12 09:35:36.037 TVRec(1): Successfully set up MPEG table monitoring. > > 2005-10-12 09:35:36.041 SM(0)::Start: begin > > 2005-10-12 09:35:36.053 SM(0)::Start: end > > 2005-10-12 09:35:36.063 TVRec(1): SetFlags(SignalMonitorRunning,) -> > > RunMainLoop,AskAllowRecording,SignalMonitorRunning, > > 2005-10-12 09:35:36.067 TVRec(1): SetFlags(WaitingForSignal,) -> > > RunMainLoop,AskAllowRecording,WaitingForSignal,SignalMonitorRunning, > > 2005-10-12 09:35:36.069 TVRec(1): SetFlags(NeedToStartRecorder,) -> > > RunMainLoop,AskAllowRecording,WaitingForSignal,NeedToStartRecorder,SignalMonitorRunning, > > 2005-10-12 09:35:36.469 JobQueue currently set at 3 job(s) max and to run > > new jobs from 00:00 to 23:59 > > 2005-10-12 09:35:36.474 JobQueue::GetJobsInQueue: findJobs search bitmask > > 4, found 0 total jobs > > 2005-10-12 09:36: 06.504 JobQueue currently set at 3 job(s) max and to run > > new jobs from 00:00 to 23:59 > > 2005-10-12 09:36:06.508 JobQueue::GetJobsInQueue: findJobs search bitmask > > 4, found 0 total jobs > > 2005-10-12 09:36:15.503 read <- 14 35 > > QUERY_IS_ACTIVE_BACKEND[]:[]mythbox > > 2005-10-12 09:36:15.508 write -> 14 4 TRUE > > > > > > _______________________________________________ mythtv-dev mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
