spam wrote:
Michael T. Dean wrote:
Make sure you provide a valid value for every input you have
associated with a video source.
Starting LiveTV channel.
This is updated on every successful channel change.
In my case I had a HD3000 card in the machine then added a air2pc
card. The 3000 would setup and tune ok, but the new card only received
a '' for the channel from the database. I then removed all cards in
mythtv-setup and reconfig'd them both. Now both cards have no starting
channel.
Starting up as the master server.
2005-11-23 06:13:04.293 New DB connection, total: 2
2005-11-23 06:13:04.300 mythbackend: MythBackend started as master server
2005-11-23 06:13:04.359 TVRec(1) Error: Start channel '' invalid,
setting to '222' on input DVBInput instead.
2005-11-23 06:13:04.364 DVB#0 Using DVB card 0, with frontend 'Oren
OR51132 VSB/QAM Frontend'.
2005-11-23 06:13:04.384 New DB connection, total: 3
2005-11-23 06:13:04.404 TVRec(2) Error: Start channel '' invalid,
setting to '222' on input DVBInput instead.
2005-11-23 06:13:04.444 DVB#1 Using DVB card 1, with frontend
'Broadcom BCM3510 VSB/QAM frontend'.
You also need to specify a valid Starting LiveTV channel (now, after
deleting your card config, for both cards). Look closely through the
mythtv-setup program and you'll find it (the words of the setting are
above).
Mike
_______________________________________________
mythtv-dev mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
