Hello, First off, I'm not opening a ticket about this because I don't have the relevant logs, or time to test a fix at present (my mythtv box is kinda in use over Christmas :-)).
However, I had a brief look at current svn (8332) last night, and it appears that I may have a problem with the new LiveTV streaming stuff. My setup is an EPIA MS 12000 (C3 Nenemiah at 1.2GHz) with Openchrome's CLE266 drivers and a Hauppauge Nova-T PCI. I'm running Linux 2.6.12.3. With MythTV 0.18.2 and the plain xv drivers, a single LiveTV stream with nothing else going on takes 5% of CPU for the backend and about 40% for the frontend. With the xvmc-via driver, that falls to 15% for the frontend. svn 8332 fires up LiveTV with the frontend at about 50% and the backend at about 46%. As the stream initialises and we go through selecting codecs, I get backend 5% frontend 70% or so for a while, followed by the frontend shooting up to 50% and the backend taking between 50 and 80% of CPU. This obviously leads to confusion, dropped TS frames from the tuner card, and almost-unmoving video. If you continue to run the (basically static) video for 30s or so, it does pick up to being merely very jerky. A little investigation suggests that most of the backend CPU is being eaten by the output stage (though there is now quite a lot of code in the TS processing path, which I suspect may hurt low-powered systems eventually). (Incidentally, the bailout clause around dtvrecorder.cpp:280 is not going to be loved by sensitive decoders, though since I don't believe in them, I don't care :-)) I eventually managed to do some little good by tricking dtvrecorder into batching its writes, but this merely lead to stop-starts on the frontend side - the frontend would run the video as fast as it could until it ran out, then hang with `prebuffering pause' - presumably because the PTS had by that time long past. Commenting out the entire TS processing stream did bring mythbackend's CPU usage under control (though the frontend carried on using 30-40% as it failed to get packets). Since this box is my main living-room TV interface, I've reverted to MythTV 0.18.2, which works very nicely :-), but I thought the info above might be useful. If anyone wants to follow it up, please let me know - I have a built copy of svn which I can get going again after the New Year to test with. On a related note, since I'm now back at 0.18.2, I have monochrome OSD. I'm planning to update danielk's cleanups of Ivor Hewitt's patch for colour OSD in ticket 101 - I'm not going to spend much time on it, since it will go away when 0.19 is released, but if anyone'd be interested in it, I can add it to the ticket when I'm done..? Richard. _______________________________________________ mythtv-dev mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
