|
Ok, I’m not exactly sure if this is a dev problem,
but here goes. I downloaded the latest SVN and compiled it in my old
environment (same machine, 32-bit PVR-500) and it works great. I decided that I
would try to go to 64-bits again (same machine) and finally try to get the
HD3000 card that’s been sitting on my shelf for 6 months to work. So I
get everything compiled just fine in 64-bits, grab the newest kernel 2.6.15.1
because the HD3000 drivers are in the source. I can tune and watch about half a
dozen channels just fine using QAM. So I spent the last two days working to get
Myth functioning. Where I am at now is mythtv-setup can scan the channels, it
locks onto them and add them, but when I go to view the channel, the front end
spits out tons of: 2006-01-18 16:37:56.280
RingBuf(/mythtv//1864_20060118163747.mpg) Error: Invalid file descriptor in
'safe_read()' And so I check the files with mplayer and nothing, just a
black screen. The backend shows: 2006-01-18 16:46:41.279 adding: picard as a client (events:
0) 2006-01-18 16:46:41.289 TVRec(1): Changing from None to
WatchingLiveTV 2006-01-18 16:46:42.563 DVB#0 DVB SI Table Parser Started 2006-01-18 16:46:42.718 Finished recording Unknown: channel
1864 2006-01-18 16:46:42.750 Finished recording Unknown: channel
1864 0: start_time: 5859.060 duration: -9223372036854.775 stream: start_time: 65100.668 duration: -9223372036854.775
bitrate=0 kb/s 2006-01-18 16:46:46.052 AFD: Opened codec 0x2aaab1b034e0,
id(MPEG2VIDEO) type(Video) 2006-01-18 16:46:46.052 NVP: Disabling Audio,
params(-1,-1,-1) 2006-01-18 16:46:46.052 AFD: Initializing audio parms from
audio track #0 2006-01-18 16:46:46.053 AFD: Audio format changed from
id(NONE) -1Hz -1ch 0bps ;
id(NONE) -1Hz -1ch 0bps
to id(NONE) -1Hz -1ch
0bps ; id(NONE) -1Hz -1ch 0bps 2006-01-18 16:46:46.053 NVP: Disabling Audio,
params(0,-1,-1) 2006-01-18 16:47:13.910 TVRec(1): Changing from
WatchingLiveTV to None 2006-01-18 16:47:14.117 Finished recording Unknown: channel
1864 2006-01-18 16:47:41.755 Running HouseKeeping Not sure where to go from here. Any ideas? By the way, I haven’t
even messed with the PVR-500. I want to get the HD3000 squared away first
before messing with ivtv drivers. System – Dual Xeon Hyper Threaded 2.8Gz, HD3000,
Nvidia GeForce 6600, Debian sarge amd64 vanilla 2.6.15.1 kernel. SVN 8644. Thanks, Robert |
_______________________________________________ mythtv-dev mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
