Can you send out a patch showing your loop? Thanks, Mark.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Friday, January 20, 2006 4:58 PM To: [email protected] Subject: [mythtv] If you don't match on PMT....Re-Tune - Possible? Hi everyone. I'm a user of Dish Network's legacy switches....that uses the 13/18V pulsing to send bits...Unfortunately, it's not always reliable. So what I've done so far is put the tuning code in a loop, looking for a status of 0x1f from the DVB card. This ensures a successful lock. So far so good. That's not where I'm having my problem now. About 70% of the time, I lock on to the right channel. The other 30%, I end up on *a* channel, but on the wrong satellite. Is there a way from the signal monitor to call a re-tune if we get to the PMTs and our desired PMT is not in the PAT? If I can get this to work, I should be able to have 100% reliable tuning. Thanks, -Matt _______________________________________________ mythtv-dev mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev EMAIL DISCLAIMER Please Note: The information contained in this message may be privileged and confidential, protected from disclosure, and/or intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any disclosure, distribution, copying or other dissemination of this communication is strictly prohibited. If you received this communication in error, please immediately reply to the sender, delete the message and destroy all copies of it. Thank You _______________________________________________ mythtv-dev mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
