I don't see how it would be a factor. If you're looking at the correct switch port and you get signal and a correct NIT you should have a lock. The key here is the switch.
- Mark. -----Original Message----- From: Endaf Jones [mailto:[EMAIL PROTECTED] Sent: Saturday, January 21, 2006 6:19 PM To: Development of mythtv Subject: Re: [mythtv] If you don't match on PMT....Re-Tune - Possible? -> Better Idea On 1/21/06, Matthew Drobnak <[EMAIL PROTECTED]> wrote: > If you check the NIT, There's the network id (already have a patch for > this from someone else), but also inside of the NIT is the orbital location > of the satellite. Therefore, if one names their video source (or uses the > location directive - how would I enable that for a non-rotor app?) > as the same as the location...we could match on that to ensure it's tuned > correctly. That's fine to LNB's that are in-line with the motor, but some/alot of us have more than one LNB and they could be 4.5 degres offset to the left or right of the motor position. -- # Endaf _______________________________________________ mythtv-dev mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev EMAIL DISCLAIMER Please Note: The information contained in this message may be privileged and confidential, protected from disclosure, and/or intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any disclosure, distribution, copying or other dissemination of this communication is strictly prohibited. If you received this communication in error, please immediately reply to the sender, delete the message and destroy all copies of it. Thank You _______________________________________________ mythtv-dev mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
