I posted a message on the pcHDTV forums about this, but they don't appear to read their own forum because I have gotten zero response about this. So, I figured I'd try here since we are probably the largest easily-characterizable subset of pcHDTV users.
Ever since the new external drivers (supposedly with support for both 2000 and 3000) have come out, I haven't been able to use them because they fail to tune my HD-2000. I note that when I load the old bttv driver, dmesg reports: bttv0: using tuner=42 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... <6>Bluetooth: HCI USB driver ver 2.7 usbcore: registered new driver hci_usb not found tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc2 i2c-bus bt878 #0 [sw] tuner: type set to 42 (Philips 1236D ATSC/NTSC daul in) by bt878 #0 [sw] whereas when I load the new bttv driver, I don't get the "tuner: type set to 42" line: bttv0: using tuner=42 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tuner: Ignoring new-style parameters in presence of obsolete ones The other tuners (for the ivtv cards) are detected properly. Any clues as to why this would be? Cheers, Kyle
_______________________________________________ mythtv-users mailing list [EMAIL PROTECTED] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
