I was able to get audigy 2 working with pcm caputre 0, line 100, analog mix capture 100%, analog mix 0%
--- Florin Andrei <[EMAIL PROTECTED]> wrote: > On Thu, 2004-12-02 at 19:58 -0800, Matt Picker > wrote: > > I also have had some difficulty with my audigy. > There > > are just so many channels to play around with I > > litterally spent hours the one night playing > around. > > So true. > > > I ended up just using the mic input on the back of > my > > pc and enabling that capture in alsamixer. > > Funny, before reading your message, that's what i > ended up doing. > The mic input seems to be working fine, although it > seems very counter- > intuitive to feed line-level signal into a mic > input. > > I was finally able to watch TV using MythTV with > sound, and i am > recording a show now to make sure all is good. > > I think i hear some popping noises when watching TV. > I'm not sure what's > the cause - they don't seem to be overload pops, but > i cannot be sure. > > > What tv tuner card are you using? Some cards will > let > > you use the btaudio drivers which the 2.6 kernels > now > > have nicely supported in the alsa section. Thats > what > > I use now. You just have to be sure to set the > > recording device in myth to the new dsp#. > > Wow, that seems like a great idea! > > Anything special i have to set in > /etc/modprobe.conf? > Here are the dsp devices that i have: > > # ls /dev/dsp* > /dev/dsp /dev/dsp1 /dev/dsp2 > > The first one is the Audigy2 > The second one (dsp1) is the onboard AC97 soundcard, > which seems to be > pretty lame (couldn't turn on capture, seems quite > bad anyway). I think > i'll disable it. > Could it be that dsp2 is the TV card? I think i > remember telling MythTV > to use dsp2, but i think it gave me an error > (although i could be > wrong). The Gnome mixer does have three tabs, the > first two related to > the soundcards, the third appears to be related to > the TV card, but i am > not sure. > I do see a snd_bt87x module loaded. Could that be > the "btaudio" module > you mention? > Any other tips related to this trick? :-) > > Newbie question: if i tell MythTV to record sound > straight from the TV > card, how will it know to wich card to play it back, > so i can hear it in > the speakers connected to the Audigy? > > -- > Florin Andrei > > http://florin.myip.org/ > > > _______________________________________________ > mythtv-users mailing list > [EMAIL PROTECTED] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > __________________________________ Do you Yahoo!? Yahoo! Mail - now with 250MB free storage. Learn more. http://info.mail.yahoo.com/mail_250
_______________________________________________ mythtv-users mailing list [EMAIL PROTECTED] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
