Do you see this with the video output of the new pvr 350 ?
If so I have hear that you have to do some register change to get proper colors.
It is something like this


ivtvctl -j reg=0x6c,val=0x9a -d /dev/videoX

Someone in the list talked about changing the 0x9a to 0xfe, I haven't tried this one though.

Hope it helps

Juan


Jim Gifford wrote:

I have two identical systems finally running now.

One has the newer 991 350, which I see blue/purple people, and the older one everyone is black and white. Any suggestions, I am using the ivtv driver version 0.2.0-56_rc2z.rhfc2.at.

The setup I have is the following

Amptron M7VIZ Motherboard with 512mb DDR RAM
Duron 1.3
Main Drive - Western Digital 40GB ATA-100 Drive - /boot, swap, and /.
Video Drive - Seagate 120GB ATA-133 Drive - /video/{buffer,record}.
On Board USB - Disabled
On Board Sound - Not Used
On Board Video - Not Used
4x-DVDRW
Video for Mythtv through Happauge PVR-350 - One older model, one very new model


System Differences
1 has a Dlink Wireless Card
1 has a 56k Modem


_______________________________________________
mythtv-users mailing list
[EMAIL PROTECTED]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Reply via email to