Hello Everybody, I just reinstalled my server with FC3 (from RH9) using Jarod's Guide. Everything is running except IVTV (i.e. cannot watch TV).
Here is a snip from my /var/log/messages after loading ivtv: ***************** Dec 4 15:57:51 24 kernel: ivtv: i2c client addr: 0x50 not found! Dec 4 15:57:51 24 kernel: ivtv: Error -19 reading Hauppauge eeprom. Dec 4 15:57:51 24 kernel: ivtv: Possible causes: the tveeprom module was not loaded, or Dec 4 15:57:51 24 kernel: ivtv: the eeprom kernel module was loaded before the tveeprom module. ***************** Any ideas what is causing the error reading eeprom? Thanks, Jeff Here is the full version of messages if it helps any: Dec 4 15:57:49 24 kernel: ivtv: ==================== START INIT IVTV ==================== Dec 4 15:57:49 24 kernel: ivtv: version 0.1.10 (0.1.10-48.3_pre2_ck100zz.rhfc3.at) loading Dec 4 15:57:49 24 kernel: ivtv: Linux version: 2.6.9-1.681_FC3 686 REGPARM 4KSTACKS gcc-3.4 Dec 4 15:57:49 24 kernel: ivtv: In case of problems please include the debug info Dec 4 15:57:49 24 kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when Dec 4 15:57:49 24 kernel: ivtv: mailing the ivtv-devel mailinglist. Dec 4 15:57:49 24 kernel: ivtv: Autodetected WinTV PVR 250 card Dec 4 15:57:49 24 kernel: ivtv: Found an iTVC16 based chip Dec 4 15:57:49 24 kernel: ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11 (level, low) -> IRQ 11 Dec 4 15:57:49 24 kernel: ivtv: pci: VIA detected device: 0x0305 vendor: 0x1106 Dec 4 15:57:49 24 kernel: ivtv: i2c attach [client=eeprom,ok] Dec 4 15:57:50 24 last message repeated 7 times Dec 4 15:57:50 24 kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 Dec 4 15:57:50 24 kernel: ivtv: i2c attach [client=(tuner unset),ok] Dec 4 15:57:50 24 kernel: tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by insmod option Dec 4 15:57:50 24 kernel: tuner: The type=<n> insmod option will go away soon. Dec 4 15:57:50 24 kernel: tuner: Please use the tuner=<n> option provided by Dec 4 15:57:50 24 kernel: tuner: tv aard core driver (bttv, saa7134, ...) instead. Dec 4 15:57:50 24 kernel: saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) Dec 4 15:57:50 24 kernel: saa7115: detecting saa7115 client on address 0x42 Dec 4 15:57:50 24 kernel: saa7115: writing init values Dec 4 15:57:50 24 kernel: ivtv: i2c attach [client=saa7115[6],ok] Dec 4 15:57:50 24 kernel: saa7115: status: (1E) 0x95, (1F) 0xb1 Dec 4 15:57:51 24 kernel: msp34xx: init: chip=MSP3435G-B6 +nicam +simple +simpler +radio mode=simpler Dec 4 15:57:51 24 kernel: ivtv: i2c attach [client=MSP3435G-B6,ok] Dec 4 15:57:51 24 kernel: ivtv: i2c client addr: 0x50 not found! Dec 4 15:57:51 24 kernel: ivtv: Error -19 reading Hauppauge eeprom. Dec 4 15:57:51 24 kernel: ivtv: Possible causes: the tveeprom module was not loaded, or Dec 4 15:57:51 24 kernel: ivtv: the eeprom kernel module was loaded before the tveeprom module. Dec 4 15:57:52 24 kernel: ivtv: Encoder revision: 0x02040024 Dec 4 15:57:52 24 kernel: ivtv: Configuring WinTV PVR 250 card with 4 streams Dec 4 15:57:52 24 kernel: ivtv: Create DMA stream 0 using 128 buffers of size 32768 Dec 4 15:57:52 24 kernel: ivtv: Create DMA stream 1 using 128 buffers of size 32768 Dec 4 15:57:52 24 kernel: ivtv: Create stream 2 using 128 buffers of size 52224 Dec 4 15:57:52 24 kernel: ivtv: Create DMA stream 3 using 128 buffers of size 32768 Dec 4 15:57:52 24 kernel: ivtv: Could not detect tuner standard, defaulting to NTSC. Dec 4 15:57:52 24 kernel: ivtv: Setting audio matrix to input 3, output 1 Dec 4 15:57:52 24 kernel: ivtv: Switching standard to NTSC. Dec 4 15:57:52 24 kernel: saa7115: decoder set norm NTSC Dec 4 15:57:52 24 kernel: saa7115: set audio: 0x01 Dec 4 15:57:52 24 kernel: ivtv: Initialized WinTV PVR 250, card #0 Dec 4 15:57:52 24 kernel: ivtv: ==================== END INIT IVTV ==================== _______________________________________________ mythtv-users mailing list [EMAIL PROTECTED] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
