Can't answer all your questions but I have been using an M10K with TV-out to a LCD television via S-video.
I was contemplating doing exactly what you are about to do as I was unhappy about the S-video quality. For me the convenience of using s-video (such as allowing video switching through an AV amp) was such a plus I thought that I would see what the various tweaks avaialble for the S-video output could acheive You can get a 720x576 output from the s-video port without problems (I think this mode will work via the VGA port as well from memory). I have also started using the Unichrome drivers for Xfree which have the Epia flicker filter turned off (which definitely improved sharpness) and have recently started using Terry Barnaby's patch which turns off completely all scaling in the Unichrome drivers at 720x576. All these tweaks are perfect for DVB-t users in the UK as the stream is at the right resolution. I am now delighted with the output which is a marked improvement over my previous set-up. I tested it on the wife recently and without telling her I used an AV amp to switch between a Freeview box (an i-player which is considered of decent quailty output) and my Myth box displaying the same program live and asked her to choose which was the best picture. She chose the Myth box, which pleased me no end. Normal X displays are not quite as sharp as they are on the VGA output (especially if I output to my LCD TV at its native resolution) but for Myth its really now excellent. Using Unichrome drivers I now have a system that never runs at more than 35% CPU and the output is on a par with a decent DVD player I have. Check out http://www.kingcot.eclipse.co.uk/unichrome/unichromeTvOut.html if you haven't already, the guy is a genius at all this stuff for sure and has great advice on tuning the output of the M10K -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Derek Jennings Sent: 09 December 2004 01:46 PM To: [EMAIL PROTECTED] Subject: [mythtv-users] Advice on TV vs Monitor to use with Epia M10k I love my MythTV so much that I thought an upgrade to my TV would make it even more enjoyable. I currently use my Epia M10K mobo at 800x600 S-Video out to my old PAL 5:4 aspect ratio TV. The TV quality is good, but text is pretty fuzzy hence the desire for an upgrade. Since I do not actually use the TV tuner and rely on Myth for everything I thought I could use a computer monitor instead of a TV and have really crisp text. But the more I read about deinterlacing, progressive scan et al the more confused I get. If I use a monitor instead of a TV will I need deinterlacing enabled, and can the Epia 10k handle that? I tried enabling deinterlacing (BOB filter) and the sound became crackly when the OSD was on. If I use a TV, will the text in Myth be acceptable? (Assuming I buy a better TV than I have now) And if I get a widescreen TV with a 16:9 aspect ratio can the TV output of an Epia M10K handle that? The manual only mentions 800x600 or 1024x768 TV Out. Any advice and experience would be appreciated. BTW: I am in the UK and use DVB tuner cards. Thanks derek
_______________________________________________ mythtv-users mailing list [EMAIL PROTECTED] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
