On 12/9/2004 2:11 PM, [EMAIL PROTECTED] wrote:
I have yet to see any output from my hd2000 pcHDTV card.
One thing that might be significant in tracking down the problem
is that if I do a 'dtvscan' I get the following output
What driver version are you using? Some have reported problems using
the new HD2000/HD3000 drivers with the HD2000 card. I am using a
modified version of the HD2000 v1.3 drivers (see
http://thegeorges.us/mythtv/ ).
with no channels identified.
What HDTV channels do you have in your area? Do you get anything if you
use dtvsignal /dev/dtv xx (where xx is the DTV channel number)?
The /dev/dtv comment is OK (?) in that /dev/dtv -> /dev/dtv0 and all
other /dev/dtv? give an error on trying to open them. Since the bttv
devices are /dev/video1, etc, I would have EXPECTED to find /dev/dtv1,
but its not alive...
bttv devices start with /dev/video0, the hd2000 starts at /dev/dtv0
(/dev/dtv is usually a symlink to /dev/dtv0). I am sure someone will
pop up and say I am wrong and there are so many others and not
necessary, so I'll beat everyone to it. You have tried the other
devices so that isn't the problem.
In any case, the thing that seems just WRONG is the line
dtv unit v4l minor = 1297516246
I see different 'random numbers' with different versions of dtvscan.
I would ASSUME this should be something in the range 0-255.
Any thoughts?
Yep, that minor number does seem wrong.
--
David
_______________________________________________
mythtv-users mailing list
[EMAIL PROTECTED]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
