Hi all, I finally decided to install mythtv on a dedicated computer.
My hardware looks like the following: - P4P800SE Motherboard - Pentium 4, 2.4 GHz - 160 GB Samsumg HD - GeForce4 MX440 - PVR350 TV capture card I followed Jarod's Fedora guide till I got to the following point: I tried to play some video thru the PVR-350's output. with the following commands, but nothing got displayed on the TV screen. # /usr/bin/ivtvfbctl /dev/fb0 -noglobalalpha -localalpha # dd if=/dev/video0 of=/dev/video16 bs=64k I was able to get the test picture displayed on my TV. But since I unloaded the module and loaded the module with the following commands, I do have some weird strips accross my TV.# /sbin/rmmod saa7127 # /sbin/modprobe saa7127 I did set the parameters for PAL output with the following: # /usr/bin/ivtvctl -u 0xff # /usr/bin/ivtvctl -p 4 # /usr/bin/ivtvctl -f width=720,height=576 What are the steps I have to take, to get the TV-out working? Thanks for your help, Oliver _______________________________________________ mythtv-users mailing list [EMAIL PROTECTED] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
