I have an interesting situation I'm trying to figure out how to make myth behave properly in....
So, because I have a digital cable box, some of my channels I can only record through the box by setting it to the channel I want to tape and hooking it to the svideo input of my PVR-350. The other analog channels I use the coax connector so I don't have to fiddle with the digital box for them. I'm using the ZapIt North America data source for the guide, and I have myth configured so channels above 70 come from Svideo and below from coax. The problem came when I tried to have myth load program data into both channel sets. Everytime mythload runs it recreates ALL the channels for both sources. This means I have 130 channels for source 1 and 2 on the card, obviously a small problem.... If I manually delete the channels it works, until the load script runs again.... Is there any way to have it load the channels as they are without trying to create them for both sources? The way I originally got it working was going into mysql and doing two things: - In the source table copying the ZapIt configuration from source 2 to source 1. - In the channels table changing the source to 1 for all the upper channels and changing the chanid from 2130 to 1130 (for example). Is there anything else I have to do to stop it from creating all the channels every night? Thanks.
_______________________________________________ mythtv-users mailing list [EMAIL PROTECTED] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
