:0 How stupid of me. I'm mixing issues up... sorry if I set up anyone up for failure.
----- Original Message ----- From: Oliver Martini <[EMAIL PROTECTED]> Date: Thursday, December 16, 2004 4:39 pm Subject: [mythtv-users] Re: PVR-250 out > Thanks for your hints, gonna try it tommorow, when I'm back at the > mythtv-pc > > Just as an information, I went thru all the other steps sucessfully. > > I can't wait till it works with TV out. > > thanks, > oliver > > ------------------ > > No the dd stuff is to /dev/video16 which is the mpeg > playback not the frame buffer. > The problem is probably that its lost its pal setting. > > I would check that you have the std=2(I think and this > is from memory since i'm at work) option to force PAL > mode for ivtv and then reload ivtv as well as saa7127. > > John > --- [EMAIL PROTECTED] wrote: > > After you have loaded the modules, particularly the > > ivtv-fb.o module, check the /var/log/messages file > > > > tail /var/log/messages > > OR > > cat /var/log/messages | more > > > > and find out what /dev/fb? file it the framebuffer > > was mapped to. > > It's possible you already have other framebuffer > > device files mapped and you are "dd"ing to the wrong > > device file. > > > > ----- Original Message ----- > > From: Oliver Martini <[EMAIL PROTECTED]> > > Date: Thursday, December 16, 2004 7:56 am > > Subject: [mythtv-users] PVR-250 out > > > > > Hi all, > > > > > > I finally decided to install mythtv on a dedicated > > computer. > > > > > > My hardware looks like the following: > > > - P4P800SE Motherboard > > > - Pentium 4, 2.4 GHz > > > - 160 GB Samsumg HD > > > - GeForce4 MX440 > > > - PVR350 TV capture card > > > > > > I followed Jarod's Fedora guide till I got to the > > following point: > > > I tried to play some video thru the PVR-350's > > output. with the > > > followingcommands, but nothing got displayed on > > the TV screen. > > > # /usr/bin/ivtvfbctl /dev/fb0 -noglobalalpha > > -localalpha > > > # dd if=/dev/video0 of=/dev/video16 bs=64k > > > > > > I was able to get the test picture displayed on my > > TV. But since I > > > unloaded the module and loaded the module with the > > following > > > commands, I > > > do have some weird strips accross my TV.# > > /sbin/rmmod saa7127 > > > # /sbin/modprobe saa7127 > > > > > > I did set the parameters for PAL output with the > > following: > > > # /usr/bin/ivtvctl -u 0xff > > > # /usr/bin/ivtvctl -p 4 > > > # /usr/bin/ivtvctl -f width=720,height=576 > > > > > > What are the steps I have to take, to get the > > TV-out working? > > > > > > Thanks for your help, > > > Oliver > > > > > > > > > _______________________________________________ > > > mythtv-users mailing list > > > [EMAIL PROTECTED] > > > > > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > > > _______________________________________________ > > mythtv-users mailing list > > [EMAIL PROTECTED] > > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > _______________________________________________ > mythtv-users mailing list > [EMAIL PROTECTED] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > _______________________________________________ > mythtv-users mailing list > [EMAIL PROTECTED] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users >
_______________________________________________ mythtv-users mailing list [EMAIL PROTECTED] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
