Trying with ivtv-0.2.0-rc3a from RPM.
The video=vc:0-0 has no effect - still get segfault.
M.
----- Original Message ----- From: "John Harvey" <[EMAIL PROTECTED]>
To: "'Discussion about mythtv'" <[email protected]>; <[EMAIL PROTECTED]>
Sent: Sunday, December 26, 2004 9:12 AM
Subject: RE: [mythtv-users] PVR-350 TV-Out - Having Limited Success
Current versions of ivtv should work ok.
Anything that is over a couple of weeks old has problems but there are some
workarounds with kernel boot options. I think it's a vga= option. You should
be able to find it if you search on the ivtv-dev mailing list.
John
-----Original Message----- From: [EMAIL PROTECTED] [mailto:mythtv-users- [EMAIL PROTECTED] On Behalf Of Michael Cheshire (Mailing Lists) Sent: 25 December 2004 13:18 To: [EMAIL PROTECTED]; Discussion about mythtv Subject: Re: [mythtv-users] PVR-350 TV-Out - Having Limited Success
Matt,
I have just given up on FC3 - there sees to be problems with the ivtv_fb driver under FC3.
I'm going back to FC2 - I had a fully stable system running for months.
Last time I upgrade without reason :)
M. ----- Original Message ----- From: "Matt Mencel" <[EMAIL PROTECTED]> To: "'Discussion about mythtv'" <[email protected]> Sent: Wednesday, December 22, 2004 6:51 AM Subject: [mythtv-users] PVR-350 TV-Out - Having Limited Success
> I'm running FC3 (2.6.9-1.681_FC3) and have used Jarod's HOWTO to get
this
> far. My PVR-350 is fairly new and boasts the Type 47 tuner.
>
> Last night I finally was able to successfully get SOMETHING on my TV. > I
> went through the steps in Jarod's guide. I was able to record a signal
> off
> of /dev/video and play it back in mplayer...and also view it live and
tune
> to different channels using the ptune-ui applet. I never got a clear
> signal
> though. I could see colors and see the picture shifting when something
> changed on the screen, but it was all in thin diagonal strips going > from
> the
> upper left side to the lower right side...with lots of black interlaced
> between and around the colored diagonals.
>
> So I stopped messing with that and went on to trying to get it onto my
TV.
> When I start '/sbin/modprobe ivtv' my TV screen goes all green. Then
when
> I
> start '/sbin/modprobe ivtv-fb' my TV gets alternating green/pink or
> green/white snowyish stripes going diagonally down from upper left to
> lower
> right. Then I attempted to feed the PVR-350 input straight through to
the
> TV-OUT using 'dd if=/dev/video0 of=/dev/video16 bs=64k'. As soon as I
did
> that I got a ghost image of the TV feed coming through behind the
> green/pink/white stripes. I could see outlines of people and objects
but
> definitely no details. The audio was coming through just fine.
>
> So now...that's where I'm at. Has anyone seen similar issues to this
that
> might help me figure out the problem so I can get this going?
>
> Thanks,
> Matt
>
>
>
-------------------------------------------------------------------------- ------
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
--------------------------------------------------------------------------------
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
