Sounds like you don't have the use 350 option set in the tv playback options.
The frame buffer is 720 x 576 the tv displays something like 640 x 480 so yes there is quite a lot missing. There are a few workarounds until I get round to fixing something properly. 1) Use a window manager to set a virtual desktop 2) set the overscan options in myth I use the 2nd with no window manager at the moment. It works ok. The OSD display however for play/pause/channel change etc. currently ignores the overscan settings which I might get round to looking at one day. John > -----Original Message----- > From: Piers Kittel [mailto:[EMAIL PROTECTED] > Sent: 27 December 2004 20:48 > To: John Harvey; Discussion about mythtv > Subject: Re: [mythtv-users] X through PVR350 probs > > I have removed everything from the modules.conf that I added in and it > works fine - both input and output is fine and in colour - fantastic > thank you very much! > > But... when I start MythTV, start displaying live TV, it's extremely > jerky when taking in input via composite and outputting via composite as > well (probably 2 fps max with tearing in the middle, coupled with > slightly poor image quality) and "top" shows 80% to 100% cpu load - any > ideas? > > Also I note a large bit of the desktop is cut off by the TV on all sides > by quite a big margin - is this related? > > Thanks very much for your help again > > Cheers - Piers > > John Harvey wrote: > > I would remove all the options in that case. > > I don't have any and my X starts up in PAL mode properly. So I would > start > > with that. > > One of these old options may well be causing some bad side effect. > > > > For some reason the 7127 is selecting NTSC playback > > > > > >>saa7127: Selecting NTSC video Standard > > > > > > So that is your problem. > > > > John
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
