On Fri, 2005-01-07 at 16:27 +0000, Joel Merrick wrote: > In the living/family/bed room I'd have a VIA (epia) based board with > mpeg hardware decompression, possibly booting the device from a > microdrive or compact flash, I'd also choose a nice looking, slimline > and QUIET case. I'd run this as the frontend either over plain cat 5e or > over 802.11g. > > This will be my next project..
There's the m6000, but it hasn't enough CPU to play mpeg4s. I have a morex 3688 and it was loud enough to hear 20' away. I put a 68ohm resistor in series with the fan and it is tolerable. Behind doors in a cabinet it'll be fine. The casetronic C134 also has a fan. I've seen two fanless itx cases, one with a massive heatsink on the side and another with the case top open (grill). The shuttle is almost dead quiet, doesn't limit you to the via processors. I didn't go with simply because I didn't like the looks and didn't want anything with a floppy drive bay. -- Adam Felson <[EMAIL PROTECTED]>
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
