On Sunday, 09-Jan-2005 00:41, Neil Milne wrote: > Here's all the audio configs from my xine config file: > audio.driver:alsa > audio.device.alsa_front_device:default > audio.output.speaker_arrangement:Pass Through # cat .xine/config | grep audio. | grep -v '#' audio.driver:alsa audio.device.alsa_front_device:default audio.output.speaker_arrangement:Pass Through Same is mine.
> Here's the xine version. > [EMAIL PROTECTED] ~ $ xine -v > This is xine (X11 gui) - a free video player v0.99.3. You checked gui version. It is better to check: '# xine-config --version' which gives 1.0.0. I think it is same as yours. > Have you tried going back to 1.0.5 or 1.0.7 ALSA module/tools/lib > versions? > It could be another alsa issue... Ok. I'll try to switch back to 1.0.7 > I'm feeding a Yamaha DD/DTS amp with only the spdif hooked up - no > analog cabling at all. It works fine for me. I need analog cable as: "The digital output measures 1 dB down at 13.5 KHz, and -3dB at 17 khz, and -15 dB at 20kHz. This is atypically bad performance for sound card digital I/O..." and the 48 kHz SPDIF frequency can't be changed to anything else. :( So, the main use of digital out for me is DD/DTS encoded sound on DVD's. > What's your .asoundrc setup? I'm using the one from Jarod's guide > pages. I'll take a look at it.
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
