In message <[EMAIL PROTECTED]>
Dan Robinson <[EMAIL PROTECTED]> wrote:
> My Myth box is the only thing connected to the TV so that's the only
> input signal (via the non-rgb scart socket currently, but via rgb
> scart asap). However, when I switch on the TV it defaults to a TV
> channel rather than the scart. Then I have to hit the AV button to
> cycle to the myth input. I want to just power-on and have the TV
> switch over automatically as it does with other devices I've used in
> the past. I guess these used Pin 8 or similar.
Ah right. My TV defaults to whatever it was on when I turned it
off so I don't have that problem. I just leave it on Myth and
everything is fine.
You probably need to arrange to provide 12V on pin 8 or something
but that is going to be a bit of a pain as you will need a power
source for it.
Tom
--
Tom Hughes ([EMAIL PROTECTED])
http://www.compton.nu/
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
