>>>> [EMAIL PROTECTED] 1/10/2005 8:11:26 PM >>> >PAUL WILLIAMSON wrote: > >>I decided to try out Knoppmyth for a frontend. >> >>To those of you that run it, is there some way I can >>"tune" it for a fx5200? The video is REALLY choppy, displaying >>maybe 5 frames per second. I know it works because I had >>a full blown fc2 installation on it working fine, but wanted to >>try out knoppmyth. I also don't have audio working, but I >>figure I'll work that out after I can get the video worked out. >> >>Thanks, >>Paul >> >> >> >Are you running the frontend off the CD? What other hardware are you
>running on? While you cannot install the nVidia drivers while running >on the CD, it should run fine. I first tested the CD running the >frontend on a Dell Inspiron 8000 laptop (P III 700 w/ 256 and a >Geforce2Go) it ran fine (the smile that brought to my first...). > >Regards, > >Cecil >http://mysettopbox.tv/phpBB2/ I don't have a CD-rom drive connected to this machine permanently, it was only connected temporarily via a USB cable. It ran ok (about as choppy), so I thought by installing it fully I'd see it run a little better. The machine is an IBM NetVista, PIII 933MHz box with 256mb ram. It's also got (obviously) an FX5200, so I would think it's got the horsepower to do 30 fps or so. Paul
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
