Hi,
Has anyone managed to get an Actisys 200L to work with a Scientific Atlanta Explorer 1850 cable box? Or even a 4200? I hear that they all use the same IR codes.
I've followed the instructions at http://www.iwamble.net/IRBlaster_Howto.txt. Everything went fine and the actisys is sending out pulses when I call change_channel.csh. My cablebox seems to ignore it.
I'm running gentoo 2.6.9, the actisys is plugged into com1 serial port. I'm using the Explorer_2000 from lirc.org for my remote. When I run irw, it interprets my remote buttons correctly.
Here's the output of dmesg when I call 'modprobe remote_sir' ========= remote_dev: IR Remote Control driver registered, at major 72 remote_dev: remote_register_plugin:sample_rate: 0 remote_sir: I/O port 0x03f8, IRQ 4. enable_irq(4) unbalanced from f8bafd32 remote_sir: Installed.
Here's my /etc/modules.conf ========= ### modules-update: start processing /etc/modules.d/lirc-remote alias char-major-72 remote_sir below remote_sir remote_dev options remote_sir irq=4 io=0x3f8 ### modules-update: end processing /etc/modules.d/lirc-remote
Here's the output from remoted (the modified lircd) when I call change_channel.csh 32:
=========
Jan 17 18:52:14 penguin remoted 0.7.0pre8: accepted new client on /dev/remoted
Jan 17 18:52:14 penguin remoted 0.7.0pre8: removed client
Jan 17 18:52:15 penguin remoted 0.7.0pre8: accepted new client on /dev/remoted
Jan 17 18:52:15 penguin remoted 0.7.0pre8: removed client
Jan 17 18:52:16 penguin remoted 0.7.0pre8: accepted new client on /dev/remoted
Jan 17 18:52:16 penguin remoted 0.7.0pre8: removed client
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
