1. In mythtv-setup I added another Capture Card (even though I only have 1) to add component4 output. The tuner0 is already setup.
2. Then in Input connections, I enable component4 to use the same comcast digital cable channels, as the tuner0.
3. Restarted mythtv-backend.
Now when I go to watch Live TV I am able to hit the "C" key and switch between tuners (component4 and tuner0) and this worked OK for Video only. The tuner0 input still works fine for both audio and video.
I have the component4 (digital video output from cable) receiving the video signal fine. I have to manually tune the cable box for now. I'm planning on setting up the IR blaster for this. The sound is not working obviously due to no audio input connection to the PVR250. Coax carries both video and audio, but...
How do I enable the audio for the digital cable? Currently the digital cable box, has only 2 audio Left/Right outputs that are already going to the TV's audio in. There is no other available audio out on the cable box. Do I use a splitter for this? Also should I plug the audio into the PVR250's "line in"?
Next, if this does work with only 1 PVR250, can I somehow configure the recordings to use the proper input? component4 for the digital cable, and tuner0 for the analog?
FYI, The digital cable box is the Motorola DCT5100 that also includes HDTV.
Thanks for all the help!
Jim _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
