Check the ivtv-dv list for my latest ivtv patch. Or as a workaround before starting X send some small amount of output to /dev/video16.
dd if=/dev/video0 of=/dev/video16 bs=64k count=1 Either of these "should" fix this problem, though I would recommend the patch approach. John > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:mythtv-users- > [EMAIL PROTECTED] On Behalf Of John > Sent: 20 January 2005 01:42 > To: Discussion about mythtv > Subject: [mythtv-users] X over PVR-350 TV Out (possible or just a myth?) > > I just rebuilt my system with FC3, a few days back and everything is > working except X via the 350's TV out. Everytime I boot the machine X > hangs on startup. I get a black screen with an "x" in the middle and > it just sits there. Any help on this would be much appreciated. > Here are the details: > > Used Jarod's Guide > > Kernel = 2.6.10-1.741_FC3 > > [EMAIL PROTECTED] ~]# rpm -qa |grep ivtv > ivtv-firmware-dec-2.02.023-4.at > perl-Video-ivtv-0.13-6.rhfc3.at > ivtv-kmdl-2.6.10-1.741_FC3-0.2.0-61_rc3d.rhfc3.at > ivtv-0.2.0-61_rc3d.rhfc3.at > ivtvdev-0.8-1.rhfc3.at > ivtv-firmware-1.8a-4.at > > [EMAIL PROTECTED] ~]# lsmod |grep ivtv > ----------------------------------------------------------------- > ivtv_fb 29720 1 > ivtv 795364 2 ivtv_fb > i2c_algo_bit 8393 2 bttv,ivtv > videodev 9537 2 bttv,ivtv > > > [EMAIL PROTECTED] ~]# lspci -v > -------------------------------------------------------------------------- > -- > 05:04.0 Multimedia video controller: Internext Compression Inc iTVC15 > MPEG-2 Enc > oder (rev 01) > Subsystem: Hauppauge computer works Inc. WinTV PVR-350 > Flags: bus master, medium devsel, latency 64, IRQ 5 > Memory at ec000000 (32-bit, prefetchable) [size=64M] > Capabilities: [44] Power Management version 2 > > > [Xorg.conf ]-------------------------------------------------------------- > ------------------------------------------- > Section "Device" > Identifier "Hauppauge PVR 350 iTVC15 Framebuffer" > Driver "ivtvdev" > #Driver "fbdev" > > ### change fb0 to whatever your card grabbed > Option "fbdev" "/dev/fb1" > > ### change the BusID to whatever is reported by lspci, specify it > as hex > . > # BusID "5:0x4:0" > BusID "5:4:0" > EndSection > > [grub.conf]--------------------------------------------------------------- > ---------------------------------------- > title Fedora Core (2.6.10-1.741_FC3) > root (hd0,0) > # kernel /vmlinuz-2.6.10-1.741_FC3 ro root=LABEL=/1 rhgb quiet > vga=791 > kernel /vmlinuz-2.6.10-1.741_FC3 ro root=LABEL=/1 quiet vga=792 > initrd /initrd-2.6.10-1.741_FC3.img > > > [EMAIL PROTECTED] log]# cat /var/log/messages |grep "iTVC15 TV out" > ---------------------- > Jan 18 22:36:28 MythTV kernel: ivtv-osd: fb1: iTVC15 TV out frame buffer > device > > > > [Attachments] ------------------------------------------------------------ > ----------------------------------- > Attached is my /var/log/Xorg.0.log > > > > Also I've tried the following solutions: > http://sourceforge.net/mailarchive/forum.php?thread_id=6340118&forum_id=27 > 233 > http://www.gossamer-threads.com/lists/mythtv/users/102792 > > > John > > > P.S. You know that WAF that everyone talks about...... well lets just > say there's a cold front moving through my area and that ground hog > won't be seeing his shadow anytime soon unless this gets fixed!
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
