You could run lircd in "event" mode :- lircd --driver=dev/input --device=/dev/input/event3 -p 660 /etc/lircd.conf
Then compile in native lirc support into Myth, setup a ~/.mythtv/lircd mapping file and off you go.... On the DVB card, the Hauppauge Nova-T PCI card is pretty good, I got one from PC World currently on sale at �50. Andy. On Mon, 24 Jan 2005 20:56:14 +0000, Andy Shaw <[EMAIL PROTECTED]> wrote: > Hi, > > I've recently setup mythtv, a lengthy process (certainly on an epia-m) > but at last it's all coming together. I have one last wish and that's to > get my remote control working with Myth. It's the controller that comes > with the Avermedia DVB-T TV card and I've had some minor success > already. By loading the ir_kbd_gpio I've found that the controller sends > events to /dev/input/event3. My question is how should I go about > mapping these events to mythtv? > > Currently the controller does have some effect over myth (up is down, > down is up, etc) but little else. > > If anyone could offer any advice it'd be much appreciated. > > Kind regards > Andy > > BTW, if anyone's thinking of going for an Avermedia DVB-T (low profile) > card in the UK I'd recommend against it. While my standalone Freeview > box picks up everything the Aver barely picks up a thing - and that's > with the latest firmware too. > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
