Dave thanks for the help. It sounds like exactly what I needed to know. Will give it a try tomorrow.
Cheers Ed On Tue, 2005-01-25 at 19:52 +1100, David Collett wrote: > OK, Wait, > Between steps 5 and 7, there is a step 6. > > 6. Run mythfilldatabase to populate the program information. > > Then step 10 is not strictly necessary. > > To be honest, I am not sure how/why this works, but I am confident > this is what I did. I thought that mythtv setup would try and use > "tv_grab_au --list-channels" or something to populate the database > with xmltv id's, but this cant be the case as tv_grab_au does not > support --list-channels. It seems to have done everything the first > time that mythfilldatabase is run. Can anyone shed some light on > this?? > > Dave > > > > > On Tue, 25 Jan 2005 19:47:24 +1100, David Collett > <[EMAIL PROTECTED]> wrote: > > Also, you proably want to use the tv_grab_au which has been posted to > > this list, as the other one uses d1.com.au is not reliable (or is d1 > > working again). > > > > Using this new script, here is how I setup my mythtv box: > > > > 1. edit tv_grab_au to configure it for your area > > 2. copy it into you path, and run it to make sure it actually works > > 3. run the mythtv setup program > > - set the source to 'Australia', it will exec "tv_grab_au --configure" > > which will return imediately (and do nothing, but thats ok since you > > configured in in step 1) > > 4. complete the rest of the 'source' setup, but dont do the channel setup. > > 5. quit mythtv setup program > > 7. run channels.conf-import.pl to import your DVB settings directly > > into the database > > 8. run mythtv setup again and look in the channels, they should be > > there, and be associated with the correct xmltv id's (the import > > script helps you to get this right) > > 9. you may have to edit the channels slightly, for example mine did > > not have channel numbers, so I added them by hand, bit every other > > field was correct. > > 10. quit mythtv setup and run mythfilldatabase, it will run tv_grab_au > > and populate the database with program information. > > > > Now everything should work and you can run mythfrontend. > > > > OK, so I am only about 99% sure the above procedure is what I did, but > > it sounds about right... > > > > Hope this helps, > > Dave > > > > On Tue, 25 Jan 2005 19:22:33 +1100, David Collett > > <[EMAIL PROTECTED]> wrote: > > > I rebuild my mythtv box recently and this time around I found the > > > wonderful script channels.conf-import.pl in the contrib directory of > > > the mythtv cvs (not sure if it is in the releases). It (as you can > > > probably guess) takes your channels.conf file (the one you use for > > > mplayer, probably generated by scan) and imports that into the mythtv > > > database scheme. More details and instructions are included in the > > > header of the program. > > > > > > Dave > > > > > > On Tue, 25 Jan 2005 18:04:09 +1100, Ed Murray <[EMAIL PROTECTED]> wrote: > > > > I had to alter a line of code in ir-kbd-gpio and recompile it and it > > > > then worked fine. > > > > > > > > Ed > > > > > > > > On Tue, 2005-01-25 at 14:24 +1000, David Whyte wrote: > > > > > You enter this data into mythtvsetup under channels (i think, its been > > > > > a while). Once you go to the DVB specific settings, it should be > > > > > quite straight forward. The large number is the frequency and the > > > > > other ones will be obvious from the field prompts. I can't go into > > > > > more detail as I am not near my myth box, I am at work :P > > > > > > > > > > Also, if you select DVB from the input options, myth should tell you > > > > > if it has pcked up the card OK. > > > > > > > > > > How did you get the remote working? By plugging it into the jack on > > > > > the back, or did you have to go a long way around? > > > > > > > > > > Dave > > > > > > > > > > > > > > > On Tue, 25 Jan 2005 01:51:47 +1100, Ed Murray <[EMAIL PROTECTED]> > > > > > wrote: > > > > > > Hi all, > > > > > > I (think) I am most of the way through a myth setup. > > > > > > I have the avermedia DVB-TV card running successfully in mplayer. > > > > > > The > > > > > > remote also works well. > > > > > > I am stuck at putting the channel data correctly into the > > > > > > mythconverg > > > > > > database. I have got tv_grab_au (version 0.6) and after altering the > > > > > > code askQuestion calls to ask_choice it seems to l. It will not run > > > > > > from > > > > > > myth-setup so I am using mythfilldatabase. This results in some sql > > > > > > errors. So I then ran mythfilldatabase --manual it then runs > > > > > > successfully except it asks me for some information about the > > > > > > channel. > > > > > > > > > > > > I have information like this from the scan generated channels.conf > > > > > > > > > > > > ABC TV > > > > > > Sydney:226500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:545 > > > > > > > > > > > > Could somebody explain how I can translate this into something that > > > > > > I > > > > > > can enter into the mythfilldatabase > > > > > > ie. How can I convert this into: > > > > > > > > > > > > freq id > > > > > > channel name > > > > > > > > > > > > also does the channel id have to reference anything else? > > > > > > > > > > > > Am I going about this the right way? > > > > > > > > > > > > Is this all the info I need? > > > > > > > > > > > > Any help would be much appreciated. > > > > > > > > > > > > Ed Murray > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > mythtv-users mailing list > > > > > > [email protected] > > > > > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > mythtv-users mailing list > > > > > [email protected] > > > > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > mythtv-users mailing list > > > > [email protected] > > > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > > > > > > > > > > > > > > > !DSPAM:41f5fae9107961017596544! > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > !DSPAM:41f5fae9107961017596544!
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
